1. Introduction
SP-5505P three phase portable test equipment is designed for energy meter Research and Develop department or energy meter Repair department. It uses the small phantom load power source SP-5505P and high precision three phase reference meter. The small cubage let it can be put on a table and can be moved easily.
1.1 Feature and function
1)SP-5505P three phase phantom load power source is a high stability and high efficiency phantom load power source.
2) External high precision three phase reference meter. User can use the high precision three phase reference meter individually.
3)Test equipment equipped with RS-232C communication port, can be operated from software.
Technical specification of phantom load power source
Power and consumption:
Power supply: 1P2W 220V ± 10%, 50Hz / 60Hz;
Max consumption: 700VA
Dimension: 500mm X 350mm X 650mmCurrent source:
Output current: 3x 0.001A - 3x 100A
Adjusting resolution: 0.01% (min. 0.0001A)
Power factor: -1.0 ~ 1.0(0~3600; Resolution: 0.10)
Output frequency: 45Hz~65Hz;
THD(sine wave output): <0.8%
Stability of current during sine wave output:
0.05% (180s)
Output wave: Sine wave
Output capacity: 150VA per phaseVoltage source:
Output voltage: 3x 30V - 3x 300V
Load: The Load could be resistor / inductive / capacitive(<4uF)
Adjusting resolution: 0.01% (min. 0.1V)
Output frequency: 45Hz~65Hz;
THD (sine wave output): <0.8%
Voltage stability of power source during sine wave output:
0.05% (180s)
Output wave: Sine wave
Output capacity: 15VA per meter positionTechnical specification of Error calculator
Impulse of tested meter could be: TTL / OC / Optical head(Scan head)
Max. Frequency impulse could be: 200Hz
Error display range: 0.001%-99.99%