Tic-a Air-Cooled Water Chillers with Stainless Insulated Water Tank and Anti-Freeze Thermostat

Air cooled chiller
The TIC-W series of water-cooled water chillers use a single closed -loop design for pressurised refrigerant,all models are equipped with compressor and motor overloadd protetion,phase shortage and reversal alarms,anti-freeze thermostat,pressure gauges,etc,they feature excellent performance and a long lifespan.
Features:
1:cooling capacity from 7-35 degree;
2:Stainless insulated water tank and anti-freeze thermostat;
3:R22 refrigerant used as standard for efficient cooling;
4:Refrigeration loop controlled by high and low pressure switches;
5:Compressor and pump overload relays;
6:Italian made temperature controller maintains an accuracy of ±1 degree;
7:Conpact design,easy to operate and maintain;
8:Low pressure pumps are standard configurations, while middleor high presure pumps are optionally availabe;
9:Level meter of water tank is available as an option;
10:All adopt copeland compressors;
11:TIC-A adopts tube-fin condenser design without any need of cooling water for excellent heat transfer and rapid cooling;
12:Upon request,it can be built to comply with worldwide electrical safety standards(For example:CE,UL,CSA,JIS etc).
TIC-A air-cooled water chillers include four main components,such as compressor,condenser,thermostatic expansion valve and evaporator,the system adopts a single closed-loop design for refrigeration system, refrigerant is alternatively changed from gaseous to liquid state to absorb or release heat thus a cooling effect is achieved.
When the machine is started,compressor starts working,refrigerant is compressed into high pressure and high temperature gas in the process from A to B,in the process from B to C and D,this high pressure and high temperature gas is cooled when it is passing through the condeser and changed into liguid,Heat is taken away by the cooling air,in the process from D to E, the pressure of liquid refrigerant is reduced by expansion valve and a part of the refrigerant is changed from liquid to gaseous state,in the process water in the evaporator and returns back to the compressor,this heat exchange process repeats until process water is cooled down to required temperature.
Specification:Item/parameterTIC-3ATIC-5ATIC-8ATIC-10ATIC-12.5ATIC-15ATIC-20ATIC-25ATIC-30ATIC-40ATIC-45ATIC-50ARefrigerationKW7.6913.519.0825.5631.4138.7951.1262.8277.58102.24113.94125.64capacitykca/hr661211607164052197627006333524394354013667038790697956108026CompressortypeWhirlpoolpower(kw)2.774.5679.351214.218.72428.437.7542.648power(hp)3581012.515202530404550Refrigerantweight(kg)2.74.3781113182226344248controlmodelHeatingexpansionvalvetypeR22EvaporatortypeTube-in-shellCondensortypeTube-finpower(kw)0.250.250.25*20.47*20.82*21*21*20.75*30.75*30.75*4Watertank(L)5085150180200270400650Pump(50Hz)Power(kw)0.551.12.244flow(min)802003004508331100workingpressure2.0/2.6/3.82.0/2.6/3.52.0/3/4.22.5/3/4.22.7/3.4/4.3Totalpower(KW)34.557.5912.113.718.32227.536.240.2544.5Pipecoupling(inch)coolingwateroutlet1/2"*41¹/²"*12"*12¹/²"*12¹/²"*1coolingportofwatertank1/2"*41¹/²"*12"*12¹/²"*1drainageportofwatertank1/2"1"overflowportofwatertank1/2"1"ProtectorcompressorOverloadrelaypumpOverloadrelayrefrigerantcircuitHighandlowpressureswitch/anti-freezingswitchcoolingwatercircuitBy-passvalve/waterlevelswitch(Option)Power3Φ,380V,50HzUnitchange1KW=860kcal/hr1RT-3024kcal/hr