Tpo (Reinforced/Self adhesive) Waterproof Membrane Roof/Basement/Garage/Tunnel

TPO (Reinforced/Self Adhesive) Waterproof Membrane
DescriptionIt is based on polypropylene andrubber by using state-of-the-art polymer manufacturing technology. This technology enables TPO membranes flexible at low temperature without the use of polymeric or liquid plasticizer.Feature& Benefit1. High puncture and rooting resistance, especially suitable for planting roof system.2.Easy installation and hot-air welding seam, environmentally.3. High tensile strength and elongation, size stability.4. Good plasticity, convenient for detailing and corners treatment.5. Excellent performance in aging resistance, service life of 20 years for exposed use, and 50 years for non-exposed application.Main ApplicationMainly apply to the roof waterproofing construction of industrial, civil and public buildings.
ApplicationGuidanceMembrane reinforced with mesh ( TPO-P) is applied to the single ply roof waterproof system by mechanical fastening.
Membrane with underlying layer of fabric ( TPO-L) is applied to the concrete substrate by full adhesion waterproof system.
Homogeneous membrane (TPO-H) is applied to the flashing area.Supply
Thickness
(mm)Width
(m)Length
(m)Remark1.21-320or customized as required1.51-320Technical Data SheetImplement Standard:ASTM D1970/D1970M-17/D6878M-13/D1204-14/D751-06/D471-16/D6878M-17 NO.ItemTest methodResult1
Flexibility at 29ºC
ASTM D1970/D1970M-17
TransverseNo affectionLengthwaysNo affection2
Linear dimensional change
ASTM D6878M-13&ASTM D1204-14
Transverse-0.1%Lengthways0.6%3
Tear strength
ASTM D6878M-13&ASTM D751-06
Transverse259.1NLengthways247.8N4
Tensile test
(Elongation at break)ASTM D6878M-13&ASTM D751-06
Transverse510%Lengthways740%5Water absorptionASTM D6878M-13&ASTM D471-160.59%6Factory Seam StrengthASTM D6878M-13&ASTM D751-06295.7N7ThicknessASTM D6878/D6878M-17&ASTM D751-061.3mmStorage & TransportationDifferent types and sizes of materials shall be stored separately, keep in sequence and avoid mess; Store materials in dry and ventilated condition, protect from sunshine, rain or other extreme environment; Storage temperature shall be less than 45ºC, the max height of stack is 5 layers. Prevent squeezing against membranes during transit, provide cover on top if necessary.