Transformer vacuum lubricating oil purifier for turbine waste oil recycling

Description
High efficiency vacuum oil purifier are also called transformer oil purifier,insulating oil purifier,turbine oil purifier,lubricating oil purifier,engine oil purifier,oil recycling machine.
High-efficiency vacuum oil filter is used for degassing and dedusting of industrial oils in power generation industry and electrical appliance manufacturing plants, paper mills, electrochemical plants, industrial and mining enterprises, turbine oil (turbine oil), lubricating oil, hydraulic oil and other industrial oils. Water purification and waste oil regeneration overcome the shortcomings of general vacuum oil filter machine only for removing micro water-containing oil treatment. It is the ideal special equipment for running oil purification. The main functions are dehydration, degassing, and removal of mechanical impurities. In parallel with the regeneration device, acid removal, decolorization, and insulation strength can be improved.Application
Turbine oil, hydraulic oil, lubricating oil, insulating oil, transformer oil, capacitor oil, compressor oilMain fuction
Dehydration
degassing
removing impurities
In addition to acid
Acid removal
bleaching
improve insulation strength
TechnicalParameterModel No.
ZLYC-25ZLYC-32ZLYC-50Rated FlowL/min
253250Rated Voltage
Mpa0.6Rated vacuum
Pa≤-0.095Pump-in filtration precisionμm100Pump-out filtration precisionμm5,10,20Motor Powerkw182636Power SupplyVAC380V, AC220V WeightKg360470680M/C sizemm12500x920x16001350x980x18001500x1060x1800about vacuum and filtering system
Vacuum system:
It consists of a vacuum tank, a vacuum pump, a condensing tank, a effusion tank, and an air supply system. The optimized structural design greatly increases the surface area of the oil in the vacuum system and maximizes the travel of the oil in the vacuum system. The water and gas in the oil are fully spilled.
filtering system:
With three-stage filtration, the suction port coarse filter protects the oil pump and extends the life of the main filter.
Working principle
The vacuum oil filter is designed according to the boiling point of water and oil. It consists of vacuum heating tank, fine filter, primary filter, vacuum pump, oil drain pump and electrical cabinet. The vacuum pump draws out the air in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the external oil enters the primary filter through the oil inlet pipe to remove large particles, and then enters the heating tank and enters the oil heated to 40~75 °C. In the vacuum tank, the water in the oil is rapidly evaporated into water vapor and continuously sucked into the oil-water separator by the vacuum pump. The water vapor in the separator is cooled and then reduced to water and released. The oil in the vacuum heating tank is discharged into the fine filter by the oil discharge pump, and the particulate impurities are filtered through the filter element. Thereby, vacuum filtration is performed to quickly remove impurities, moisture and gas from the oil, so that the clean oil is discharged from the outlet.
about us
XinxiangCityHuahangFilterCo.,ltd.Isestablishedin2003,wehave
1.3000m3workshopforfiltersproduction
2.ProductionandsalesintegrationinHuahangFilterCompany
3.7exportingdepartmentsforforeigntradeservices
4.16engineersfordesigningandcalculatingreasonablepriceintime
5.Morethan20workersforproductionline