Tunnel Single-Side 6*LED 115*105*18mm Highway Safety Plastic Wired Road Stud

Introductions :
The wired road stud is an eye-catching warning sign. It can clearly outline the road especially in rainy & foggy days and at night, playing an important guiding role. This system is also suitable for tunnels where there is no sunlight and continuous & sufficient power supply is needed. Besides, the system with fog detection can easily detect the road condition and automatically enhance its brightness.Application:
Expressway, tunnel, Roundabout, Safety Island, Approach road shoulder, entrances & exits' edge line of Underground parking lot, Tunnel wall, Curveor dangerousroad, Foggyarea,TheRamp,non-streetlightarea etc.Advantages of wired road stud:
1. Powered by electric supply, it works well where there is little or no sunshine.
2. Better warning effect with both super-bright LED and reflector.
3. Visible distance up to 500m, perfect warning function in rainy & foggy weather.
4. Compression resistance over 16T,long life-span.
5. Easy installation, low failure rate
6. Delicate appearance and good transmittanceSpeicification:Body MaterialPC plastic+epoxy resinCompression resistance16TDimension115*105*18mmWeight240gController VoltageAC85-265V,50 HZMarker VoltageDC 24V, 1 side≤0.45WBattery1*1.2V600mAReflector & LED coloryellow,red,white,blue,greenLuminous intensity6000mcd / LED beadLED chipTaiwan Epistar super-bright LEDFlashing mode1. constant,flash2. synchronous flashing (a controller is needed)Frequency90times/min or customizedCable length30 cm or upon your requirementsVisible distance> 500mIngress protectionIP68Packaging1. 2 pieces /eachinnerbox,2. 56pcs/14.5kgs/43*33*13cm/cartonWarrantyone yearLead time1-5 daysforsample,10-15daysforbulkorderPayment termsT/T, L/C, Western Union, PayPal
40% TT before production+balance before shipment
EXW/CIF/CNF/FOB
Installation Procedure:
• Check if the solar stud charges and discharges normally
• Identify the place for installation •Clean road surfaces
• Clean the bottom of the solar stud and use epoxy glue to stick it to the ground
• Wait 8hours for drying before activating solar stud
• Caution: never installed in the central lineMore photos:
about us:
Road, Ming Roadisspecializedinroadway&trafficsafetyproductswithover15years'experience.
AllproductsarequalityapprovedandallsolarproductsareCEcertificated.Eachsolarproductwillbetestedforat least72hoursbeforeshipment.WehavebeenexportingtoNewZealand,America,Europe,Mid-EastandSouth-EastAsia.
Our products can meet most requirements and tests in America, Europe, New Zealand, Mid-Eastand all over the world. We promise to supply a high quality products with best service, OEM and ODM are welcomed. Welcome to visit our factory!Our advantages:
1. Professional R&D team
2. Specialised in roadway safety & traffic control products since 2006.
3. Quality assurance:
Each solar road stud or solar traffic sign will be tested over 72 hours before shipment.
4.Competitive prices based on big production capacity.
5.OEM & ODM is welcome..
6.Flexible: Small orders acceptable.
7.Best after-service:
We have a good afer-service team while each product is trackable.FAQ:
1) Q:Are you factory/ manufacturer?
A:Yes,we are factory/manufacturer for traffic facilities including solar traffic signs/signal, regular road safety signs/signal ,radar speed, reflective vest, traffic cone, road construction signs, road stud, traffic wand, traffic light, warning triangle and so on with almost 12 years experience, welcome to visit us, please let us know in advance if you will come.2) Q:Do you accept OEM/ODM, how can Ichoose the most suitable model?
A:Yes,OEM/ODM are welcome! You need provide your specific request firstly and we will provide you areference according to your requirements, it is ok if you are just have aasking.3) Q: What is your warranty?
A: It is 12 months4) Q: How to deal with the problem that we buy you product but don't know how to use ?
A: We can take avideo for you or we can use WhatsApp/skype/wechat for video teaching5) Q: How do you ship them?
A:By sea, air and Express( Fedex ,UPS, DHL or TNT)according to your preference, of course you can use your own forwarders.
Express way is about 3-5 days, air shipment is about 3-4 days, sea shipment is about 30 days, of course we can accept using your own forwarders.6) Q: How long is the lead time for production?
A: For asmall order, 3-5 days is OK; for abulk order, 15-20 days depending on the quantity.7) Q:What is your payment way?
A:T/T ,western union or cash, trade assurance is also ok.8) Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.9) Q:Is this retail product?
A: Sorry ,it is wholesale product, but we accept sample order for quality checking!10) Q: Why choose US?
A:We are amanufacturer not trading company, we have produced the road safe products for years in Shenzhen, so the price is quite competitive in the market, and the quality is superior.Our Service:
OEM/ODM are always welcome.If you need design by yourself, you can provide us your design. The sample fee will depend on your design.
Sample making time: 7-10 days, will finish ASAP if urgent.
Sample fee will be refund or according to clients' order quantity.Delivery time:
Samples order is about 5-7 work days after payment /confirm/ied;
Bulk order is about 10-20 work days after payment /confirm/ied.Payment term:
*T/T.
*L/C if the total cost amount $100,000
*Western union,Paypal
*Trade assurance