Tw4200 Techwin Microwave Synthesized Signal Generator with High Accurate Power Output

Product Overview:
Synthesized Signal Generator TW4200 are microwave synthesized signal generator products withworld-class performances introduced recently by the Techwin. With high pure signal quality,adjustable power output with a 146dB dynamic range and 0.001Hz frequency resolution, it canmeet your high accurate test requirement. The standard dual-channel internal modulation signalgenerator and internal pulse generator provide comprehensive AM, FM, ØM and pulse modulationcapabilities and avoid the annoyance of selecting from numerous options. Using English operationinterface and large TFT large TFT LCD can better meet the demands of international users. Thisproduct is an ideal LO source and clock source, and also can generate high quality analog signals,mainly used in the comprehensive assessment of electronic system performances, test onhigh-performance receiver and test on parameters of components and parts. It applies to manyfields, such as aviation, spaceflight, radar, communication, navigation equipment.Main Features:--High Pure Signal Quality--High Accurate Power Output in -120~+11dBm Large Dynamic Range--Standard Internal Modulation Signal Generator and Pulse Generator--Excellent Broadband DCFM & DCØM Function--High Accurate Linear AM and Exponential AM--High-performance Pulse Modulation--170GHz Frequency Multiplying Source Module Spread Spectrum--English Operation Interface, Large TFT LCD--Frequency Step & List SweepHigh Signal Quality
Synthesized Signal Generator TW4200 provides high quality test signals, good close-to-carrierphase noise as well as excellent harmonic and non-harmonic performances, which can satisfy thetest requirements in radar system development & satellite communications for pure radiofrequency and microwave stimulus signals.High Accuracy Power Output in -120~+11 dBm Large Dynamic Range
Synthesized Signal Generator TW4200 can provide -120dBm signal output within 40GHzfrequency span with the built-in programmable step attenuator and the typical maximum outputpower is greater than +10dBm to meet your test requirements.Internal Modulation Signal Generator and Pulse Generator
Synthesized Signal Generator TW4200 as standard dual-channel internal modulation signalgenerators adopt DDWS to produce high quality modulation signals with DC-1MHz frequencyrange, 0.1Hz resolution and more than 7 kinds of modulation waveforms to providecomprehensive signal simulation.The standard internal pulse generator has 6 options of pulse modes totally. The pulse width can beset randomly between 40ns and 42s at a step of 20ns to meet your test requirements forhigh-performance pulse source.Excellent Analog Modulation
The Synthesized Signal Generator TW4200 comes standard with good analog modulationcapability as well as AM, FM, ØM functions and supports the inputs of internal and externalmodulation sources. It has excellent DCFM capability with modulation rate up to DC~10MHzand good DCØM capability with modulation rate up to DC~1MHz. It has two kinds of workmodes: linear AM and exponential AM. The depth of the linear AM is greater than 90%. It alsoprovides comprehensive solutions to generate high quality analog signals.High-performance Pulse Modulation
The Synthesized Signal Generator TW4200 comes standard with high-performance pulsemodulation function. When the output frequency is greater than 3.2GHz, its modulation depth isgreater than 80dB and its modulation rate is smaller than 20ns and its minimum pulse width is40ns. It supports gated, external, etc. many trigger modes. It has double-pulse output capabilityand provides flexible and convenient solutions for radar pulse signal imitation.110GHz Frequency Multiplying Source Module Spread Spectrum (Standard)
The Synthesized Signal Generator TW4200 comes standard with a frequency multiplying sourcemodule interface to which the waveguide Series frequency multiplying source modules ofTechwin can be added to spread output frequency to 110GHz, which provides a simple, quick,low-cost solution for high quality millimeter-wave signal generation.English Operation Interface, Large TFT LCD
The Synthesized Signal Generator TW4200 as an independently designed software uses largescreen and English operation interfaces and has a panoramic view of the current state.Auto Software Update with a U Disk
The Synthesized Signal Generator TW4200 provides a USB interface available for smart softwareupdate and data backup. You can easily use a U disk for simple and quick software update andmaintenance.Typical Applications:Comprehensive Performance evaluation on Electronic System
As a microwave synthesized signal generator product with top-level performance in such field,TW4200 can generate high quality analog signals in a wide dynamic range within the frequencyrange of 250kHz~67GHz. It is used in the comprehensive performance evaluation on radar,electronic warfare and communication equipment, etc. electronic systems to resolve the problemsin system specification tests on bandwidth, sensitivity, dynamic range, intermodulation distortionand so on.Test on High-performance Receiver
With dynamic output range up to146dB, extremely high frequency stability and frequencyresolution of 0.001Hz, the Synthesized Signal Generator TW4200 can output high accuratestandard test signals in performance tests on the high-performance receivers of radar, electronicwarfare and communication equipment to resolve the problems in specification tests on sensitivity,dynamic range, and channel selectivity and so on.Local Oscillator Substitution
With high pure signal quality, the Synthesized Signal Generator TW4200 can be used as an ideallocal oscillator to substitute those in the equipment under test, such as transmitter and receiver. Itwill effectively avoid negative affect on test due to bad quality of local oscillator so as to ensurethe accuracy and creditability of your test.Technical Specifications:
Frequency PerformanceFrequency
RangeTW4200A:
250 kHz~20 GHz
TW4200B:
250 kHz~40 GHz
TW4200C:
250 kHz~50 GHz
TW4200D:
250 kHz~67 GHzFrequencyN250 kHz ≤ f ≤ 250 MHz1/8250 MHz < f ≤ 500 MHz1/16500 MHz < f ≤ 1 GHz1/81 GHz < f ≤ 2 GHz1/42 GHz < f ≤ 3.2 GHz1/23.2 GHz < f ≤ 10 GHz110 GHz < f ≤20 GHz220 GHz < f ≤40 GHz440 GHz < f ≤67 GHz8Frequency
Resolution0.001 HzTime-base
Aging Rate
(typical value)5 x 10 -10 /day (after 30 days )Sweep ModeStep sweep List sweep Power sweep Ramp(Analog) sweepHarmonic250 kHz ≤ f ≤ 10 MHz-28 dBc (typical value)10 MHz < f ≤2 GHz-28 dBc2 GHz < f ≤ 20 GHz-55 dBc20 GHz < f ≤ 40 GHz-50 dBcSub-harmonic250 kHz ≤ f ≤ 10 GHzNone10 GHz < f ≤ 20 GHz-50 dBc20 GHz < f ≤ 67 GHz-50 dBcNon-harmonic250 kHz ≤ f ≤ 2 GHz-65 dBc2 GHz ≤ f ≤ 20 GHz-56 dBc20 GHz < f ≤ 40 GHz-50 dBc40 GHz < f ≤67 GHz-44 dBcSSB Phase
Noise
(dBc/Hz)100 Hz1 kHz10 kHz100 kHz250 kHz ≤ f ≤ 250 MHz
(Measurement at +10 dBm)-101-121-130-130250 MHz < f ≤ 500 MHz-108-126-132-132500 MHz < f ≤ 1 GHz-101-121-130-1301 GHz < f ≤ 2 GHz-96-115-124-1242 GHz < f ≤3.2 GHz-92-111-120-1203.2 GHz < f ≤ 10 GHz-81-101-110-11010 GHz < f ≤20 GHz-75-95-104-10420 GHz < f ≤40 GHz-69-89-98-9840 GHz < f ≤67 GHz-64-83-92-92
Power PerformanceOutput Power Range
(25±10ºC)TW4200A:+13 dBm ~ -20 dBm
Adding option 1: +11 dBm ~ -120 dBm (-135 dBm is available)
TW4200B:+10 dBm ~ -20 dBm
Adding option 1: +8 dBm ~ -110 dBm (-135 dBm is available)
TW4200C/ TW4200D:+6 dBm ~ -20 dBm
Adding option 2: +3 dBm ~ -90 dBm(-110 dBm is available)Power Accuracy
(25±10ºC)When there is no programmable step attenuator option> +10 dBm+10~-10 dBm-10~-20 dBm250 kHz ≤ f ≤ 2 GHz±1.0 dB±1.0 dB±2.0 dB (typical)2 GHz< f ≤20 GHz±1.2 dB±1.0 dB±2.0 dB(typical)20 GHz < f ≤40GHz/±1.2 dB±2.2 dB(typical)40 GHz < f ≤50GHz/±1.5 dB±2.2 dB(typical)50 GHz < f ≤67GHz/±1.8 dB±2.5 dB(typical)When there is no programmable step attenuator option> +10
dBm+10 ~ -10
dBm-10 ~ -60
dBm-60 ~ -90 dBm250 kHz ≤ f ≤2 GHz±1.0 dB±1.0 dB±1.5 dB±1.8 dB(typical)2 GHz< f ≤
20 GHz±1.2 dB±1.0 dB±1.5 dB±2.0 dB(typical)20 GHz< f ≤40 GHz/±1.2 dB±1.8 dB±2.2 dB(typical)40 GHz< f ≤50 GH/±1.5 dB±2.0 dB±2.5 dB(typical)50 GHz< f ≤67 GHz/±1.8 dB±2.5 dB±3.0 dB(typical)
Modulation PerformanceModulation
PerformancePulse
Modulation500 MHz≤f≤67 GHzPulse modulation on/
off ratio>80 dBPulse modulation
rise/fall time<20 nsMin. pulse width
(internally leveled)1 μsMin. pulse width
( level hold, ALC off
with power search)0.1 μsAmplitude
ModulationModulation mode: Linear mode, exponential mode
Modulation rate (broadband 3 dB, modulation depth 30%): DC~100 kHz
Max. depth: Linear mode 90%, exponential mode 20 dB
Accuracy (1 kHz modulation rate, linear mode):<3%
Distortion (1 kHz modulation rate, 30% depth, linear mode, total harmonic
distortion): < 1.5%Frequency
ModulationMax. frequency offset: N x 8 MHz
Accuracy (1 kHz rate, 300 Hz~3 kHz demodulation bandwidth, 1 kHz <
frequency offset < N x 800 kHz, except residual frequency modulation): <
±(5% x set frequency offset + 20 Hz)
Modulation rate (3 dB bandwidth):
Internal DC DC-100 kHz; Internal AC: 100 kHz-1 MHz;
External DC DC-100 kHz; External AC: 100 kHz -10 MHz.
Distortion (1 kHz rate, N x 800 kHz frequency offset, total harmonic
distortion): < ±2%Phase
ModulationMax. phase offset: It is Nx80rad when the modulation bandwidth is 100
kHz.
Accuracy (1 kHz rate, 300 Hz~3 kHz demodulation bandwidth, 1rad <
phase offset < N x 80rad, except residual phase modulation, 100 kHz
modulation bandwidth): < ±(5% x set phase offset + 0.01 rad)
Modulation rate (3 dB bandwidth):
Modulation bandwidth 100 kHz: DC-100 kHz; modulation bandwidth 1
MHz:
100 kHz -1 MHz (typical value)
Distortion (1 kHz rate, N x 80rad phase offset, total harmonic distortion,100 kHz modulation bandwidth): < 1%
Our Service
>One to one, heart to heart service, we look forward the long-term continuing services for you, not just one or two times cooperation.>Perfect after-sales service: 24-hour designated telephone number, e-mail and customer manager.>We guarantee that each product is tested carefully and works very well before shipment. We strive for 100% customer satisfaction on every sale we complete.>During the warranty period (One year warranty(TWOyears orTHREEyears warranty is avaliable for special order), we can repair or replace the defective parts for free. After the warranty time, we can also repair the defective parts, but only charge for parts.>We are responsible for the whole lifespan of our products, and whenever you have questions during use, just call us, we are glad to offer technical support timely.aboutus
We,Techwin(China)IndustryCo.,Ltd,arethehighlyopticalfibermachineprofessionalsupplier,focusingonFusionSplicer,OTDR,OpticalFiberPowerMeter,FiberLightSource,CableFaultLocator,OpticalFiberIdentifier,VisualFaultLocator,OpticalFiberTalkSet,PONPowerMeter,OpticalVariableAttenuator,OpticalToolKit,PLCSplitter,FiberCoupleretc.OurproductsandServiceareexportedtoworldwide(Morethan90CountriesandRegions)andwecreateUSD10,000,000forourannualsales,andcontinuetherapidgrowthallthetime.-CE&ISO9001:2000certifiedcompany
-FirstmanufacturerinChina
-Productsandservicesareexportedtomorethan60countriesandreligions
-FirstClassServicesandexpertquality
-Goodafter-salesservice,oneyear warranty
-Professionaltechnicalmaintenancepersonnelandengineerstoserveyou