Typical All Steel Lab Bench with Mobile Cabinet (JH-SL022)

Specification:
Product name: Steel lab bench with mobile cabinet
Type:JH-SL022
The size can be custom-made requested by customers.
A. Worktop:The worktop is based on the requirement of customers such as phenolic
resin board, epoxy resin board or ceramic board. The edge of worktop will be treated
specially to ensure its safety for human body.B. Structure:Steel structure, full cabinet design, the material for cabinet is 1.0mm
BAOGANG cold rolled sheet. The processing procedures includes cutting, grooving,
bending, shaping, assembling and polishing. The products are produced by precise
CNC machine. All the welding points have been polished specially which will not hurt
the hand. The inside cabinet is with front and back upright columns and reinforcing
ribs to increase the bearing capacity and impact resistance capacity.C. Cabinet:The cabinet is made of high quality cold rolled sheet with different thickness
as per its different loading weight. The surface is treated by acid washing, phosphorization
before coating by epoxy resin powder. The cabinets can be opened with all blank space
without middle support. The inside cabinet is equipped with adjustable setting for mobile
layer.
D. C-frame: It's made of 60x40x1.5mm steel pipe coated with epoxy resin powder.
E. Surface panel for door and drawer:The door is with double layer made of 1.0
BAOGANG cold rolled sheet. We can fill the sound insulation material into the inside
space between two layers if it's required by customer. The drawer is shaped once made
of bending cold rolled sheets. It's with excellent bearing capacity for the support of drawer.
The sealed panel after bending connects with the outside drawer surface by self-drilling
screws. It can prevent the crashing when closing the drawer and noise caused by abrasing
the coated layer.
F. Bottom panel for cabinet body:The bottom panel is formed once with reinforcing
ribs to increase its bearing capacity and prevent the deforming of steel layers.
G. Handle:Stainless steel U-type handle or long handle shaped once made of steel.
H. Movable back panel:Movable and free dissembling structure which is convenient
for checking water, electricity and gas pipe etc.
I. Movable layer:It's with reinforcing rib inside to increase its bearing capacity to
avoid deforming. It can be dissembled freely and the height can be adjusted.
J. Hinge:Using durable DTC 90 degree or 304 stainless steel hinge which can be used
for long time.
K. Drawer sliding rail:Using 3-joints bearing drawer rail with noise reduction, it can
ensure the full opening for the drawer with good bearing capacity and without deforming.
L. Shelf:The shelf is made of steel frame and steel hanging pieces. The layer is made
of toughened glass which is suitable to put all kinds of chemicals on it.
Packing:
1.Loading picture.