UV Photolysis Equipment

UV photolysis equipment1.Product introductionThe UV photolysis exhaust gas purifier is a photon of different energy generated by a special ultraviolet light source, which utilizes the strong absorption of photons by the odorous waste material, dissociates and excites the odorous waste molecules under the bombardment of a large number of energetic electrons, and makes the liberation free. The state of the pollutant molecules combined with ozone oxidation into small molecules harmless or low-harm compounds, such as co2, h2o, etc.2.Application rangeDeodorization and purification treatment of malodorous gases such as refineries, rubber plants, chemical plants, pharmaceutical plants, sewage treatment plants, and garbage transfer stations3.Working principleA. This product uses a special high-energy, high-ozone UV ultraviolet light beam to illuminate malodorous gases, and cracks malodorous gases such as ammonia, trimethylamine, hydrogen sulfide, methyl sulfide, methyl mercaptan, methyl sulfide, dimethyl disulfide, carbon disulfide and benzene. Ethylene, sulfide H2S, VOC, benzene, toluene, xylene molecular bonds, so that the free state of the pollutant molecules and ozone oxidation combined into small molecules harmless or low-harm compounds, such as CO2, H2O and so on.
B. Using high-energy, high-ozone UV ultraviolet light beam to decompose oxygen molecules in the air to generate free oxygen, that is, active oxygen. Because the positive and negative electrons carried by free oxygen are unbalanced, it needs to be combined with oxygen molecules to generate ozone.
UV+O2→O-+O* (reactive oxygen) O+O2→O3 (ozone), it is well known that ozone has a strong oxidation effect on organic matter, and has an immediate effect on the removal of malodorous gases and other irritating odors.
C. After the odorous gas is input into the purification device by using the exhaust device, the purification device uses a high-energy UV ultraviolet light beam and ozone to synergistically decompose and oxidize the malodorous gas, thereby converting the malodorous gas substance into a low molecular compound, water and carbon dioxide, and then Exhaust outside through the exhaust duct.
D. The high-energy UV beam is used to crack the molecular bonds of bacteria in the malodorous gas, destroy the nucleic acid (DNA) of the bacteria, and then carry out oxidation reaction through ozone to completely achieve the purpose of deodorization and killing bacteria.4.Equipment featuresEfficient removal of malodor: It can effectively remove volatile organic compounds (VOC), inorganic substances, hydrogen sulfide, ammonia, mercaptans and other major pollutants, as well as various malodors. The deodorization efficiency is up to 99%, and the deodorization effect is greatly Exceeding the national odor emission standard issued in 1993 (GB14554-93).No need to add any substances: only need to set the corresponding exhaust duct and exhaust power to make the malodorous gas deodorize and purify through this equipment, without adding any substances to participate in the chemical reaction.
Adaptable: It can adapt to high concentration, atmospheric quantity, deodorization and purification treatment of different malodorous gas substances, and can work continuously for 24 hours every day, and the operation is stable and reliable.Low operating cost: This equipment has no mechanical action, no noise, no need for special management and routine maintenance. It only needs to be checked regularly. The energy consumption of this equipment is low (about 1000 cubic meters per hour, only about 0.2 kWh of electricity) The wind resistance of the equipment is extremely low <50pa, which can save a lot of energy consumption of exhaust air.No pretreatment is required: no special pretreatment is required for malodorous gases, such as heating and humidification. The working environment temperature of the equipment is between -30 °C and 95 °C, the humidity is between 30% and 98%, and the pH is between 2 and 13. Both can work normally.The equipment has a small footprint and light weight: it is suitable for special conditions such as compact layout and narrow space. The equipment covers an area of <1 square meter / processing 10000m3 / h air volume.High-quality imported materials manufacturing: fireproof, explosion-proof, anti-corrosion performance, equipment performance is safe and stable, stainless steel material, equipment life is more than 15 years.5.Equipment selectionEquipment modelAir volume(m3/h)Equipment size(mm)Tuyere size(mm)power(w) /Voltage(v)Wind resistance(pa)UV-1001000700x400x350300x250550w/220v<50UV-3003000850x500x500400x4001050w/220v<50UV-5005000870x750x950650x7501300w/220v<50UV-7507500870x750x950650x7502000w/220v<50UV-100010000950x750x960650x7502600w/220v<50UV-1500150001050x1000x1700800x4004500w/220v<50UV-2000200001050x1000x1700800x4006000w/220v<50UV-3000300001700x1500x21001500x7007800w/220v<50UV-5000500003200x2000x18008000x140013000w/220v<50UV-7000700003200x2000x18008000x1400175000w/220v<50