Ultrasonic Thickness Measuring Device Electric Cheap Price

Brief introduction of ultrasonic thickness gauge
It can measure the thickness of metal materials, high temperature pipes, pipes, plates (steel, aluminum), plastic, iron pipe, PVC pipe, glass and other materials. Can be widely used in manufacturing, metal processing industry, chemical industry, commercial inspection and other testing areas, but also on the production equipment in a variety of pipes and pressure vessels to monitor their use in the process of monitoring the degree of corrosion after the reduction is Material protection necessary special equipment.
Features of NANBEI ultrasonic flaw detector:
UM -1 is the basic thickness meter and UM-1D offers this special function, when there is oil paint on the surface of the object, the net thickness of the material can be directly measured without necessarily remove the paint.
General thickness measurement mode measures the thickness of an object by calculating the time difference T1 of the probe sending ultrasonic pulse to the object and the probe receiving the reflection from the first bottom echo(including the coating thickness).
Through coating mode measures the thickness of an object by precisely calculating the time difference T2 between two consecutive bottom echo (excluding the coating thickness).
UM series ultrasonic thickness gauge is extremely suitable for measuring the pipes about their thickness lose after corrosion.
Each instrument has been calibrated by 34 standard test blocks before delivery to ensure the accuracy of the measurement.

Display Type128 x64 dot-matrix LCD screen with EL backlightOperating PrincipleP-E (pulse-echo) with dual-crystal probesMeasuring Limits of Tube(Steel)20mm X3.0mm (PT-08 probe)
15mm X2.0mm (PT-06 probe)
The measuring error is up to ± 0.1mmMeasuring ErrorLow limit to 10mm: ±0.1mm
10mm to high limit: ±±(1%H+0.1) mm
Note: H is the actual thickness of the testing materialRepeatability0.1mmDisplay Resolution0.1mm, 0.001inchUnitsInch or MillimeterCalibration MethodZero calibration, Two-point calibrationV-Path CorrectionAutomaticUpdate Rate4HzMaterial Velocity Range1000~9999m/s (0.0394 to 0.3937in/μs)Memory Function5 arrays are divided to store 500 thickness valuesMinimum Value CheckingMove the probe along the surface of the testing material, the gauge is able find the thinnest point automaticallyWarning FunctionIf the measured value exceeds the pre-set thickness limit, the warning tone will startVelocity StorageVelocities of 5 different materials can be stored totallyLanguagesEnglish and ChineseCommunication PortUSB port or Serial RS 232 port (Optional)Application SoftwareUmView Software for transmission,storage,analysis and documents editing (Optional)Power RequirementsTwo 1.5V AA alkaline batteries (Warning with low battery voltage)Operating TimeUp to 200 hours with alkaline batteries (without backlight)Instrument Shut-offAUTO OFF after 5 minutes of inactivityOperating Temperature-10 °C to +50 °C , -20 °C in special requirementsSize149mm X 73mm X 32mm(H X W X D)Weight210g including batteriesCompanyshow
Factoryshow
CEcertification
WarrantyandAfter-saleservice
*Wesupply1YearWarranty,andlifelongFreetechnicalGuidingandTraining