Vertical Anti-Clip Sensor for Automatic Doors

Vertical Anti-clip Sensor for automatic doors

Product Overview

1.Rotating bracket(for exposure installation)

2.Front cover, with optical lense

3.Trans mitter lens

4.Recelive height screw

5.Detection height screw

6.LED indicator

7.Gear cllp(use with 1)

8.Decorative Cover(for hidden installation)

9.Fixing screw(use with 8)

Noted: The LED indicating lamp/is with blue light at normal condition. And turns red light when had detected the existing objects.

Installation mode

Notes:Maximum installation height should not over 3000mm.

The wiring of input and output

Operating principle

This system is based on the principle of operation triangle infrared existing detecting. The crosspoint of emission ray and receive ray is the max detection scope.

In order to adapt the background of detector, the working system is combined with the background rejection mode. Relevant background will be detected but be ignored. In the detection process, only the reflection of detection area will be received.(Background rejection of humidity , ground will not be received)

Background rejection techique:

--protection for the moving objects.

--No affection of the background factors.

Detection Height Adjustment

Detection Height Adjustment is easy.

1.Installed the infrared presence detector..

2.Adjusta the detection of infrared ray to the ground position and get energized.

3.Adjust the maximum detection height by the screw(height adjustment as below) clockwise . LED indicator urns red. The detection height has reached the ground.

4.Adjust the screw(height adjustment as below) counterclockwise. LED indicator turns blue. The background has been rejected.

5.In order to ensure the reliability of background rejection, fine-tuning the screw counterclockwise. Till the detection object is 200mm far from the groud.

6.Infrared presence detector works effectively.

Detection Area adjustment

This product is with the function of dectecing the lateral area by fine-tuning the main body of infrared presence detector.

Operation way : 1. Loose the screw 2.Rotate the main body of Infrared presense detector to the right position. 3. Fix the screws.

Common Fault

sensor does not work .

no instruction from indicator

check working voltage and input/output connection (see article 4)sensor does not work when people need enter

Installation height should not over 3000mm, adjusta the detection height screw in clockwise direction.

Action keeps output when no one enterBackground has been detected, adjust the detection height screw in counter -clockwise direction.action from fixed point even no need for workingMental framre, outthrust under vertial direction, adjust the detection area by the adjust he main sensor body.Action switch points can not b efoundAdjust the detection adjust screw to found out the switch point.

Technical data

Data typeSpecific parametersNote thatvertical scan adjusted range800-2500mm

unscrew adjustment with machinery

after scanning the rangecan offset 150mmblack/white difference<400mmwhen 2000mm height measurementeffective induction areaφ50mmwhen 2000mm height measurementdivergence angleabout 140 degreesmaximum height of installation3000mmlight typepulse,intermitten IRED

working voltage

AC/DC 12-36V1A 12VDCresidual corrugatedmaximum 10%