Vmzinc Zinc Composite Panel Zcp for Building Facade with Over 30 Years Warranty

Inspired by Aluminum Composite Panel,WILLSTRONG®Zinc Composite Product (ZCP)is achieved by replacing aluminum skin with pre-weathered zinc sheet. ZCP is suited to theuse of outdoor applications such as external claddings, canopies, soffit, awnings, and roofs,especially when you feel insufficient with conventional building materials.Besides its aesthetic and prestigious surface aspects, ZCP is typically featured with characteristics of perfect flatness, lightweight, high rigidity, workability, long life span and self-repair imperfections and scratches.There are mainly three types of ZCP as per compostion.Type one : ZCPType two: ZCP/frType three: ZHPZinc surface is self-repairing. Leave small scratches as it stands, and a naturally produced passivation layerof zinc hydroxylcarbonate, named patina, will graduallyrepair them over time.
The passivation layerwill be produced in six months or up to two years. And it will not drop off.Dimensions
ZCPZHPStandardPanel Thickness4.0mm15mmOptional Thickness5.0mm, 6.0mm6mm, 10mm, 20mm, 25mmStandard Width980mmOptional Width1000mm, 1230mm, 1250mmStandard Length2440mmOptional LengthBespokelength, maximum length less than5600 mm
Tolerance
Length±3.0mmWidth±2.0mmThickness±0.2mmBowZn-Zn≤5.0mm/mZn-Al≤7.0mm/mDiagonal difference≤3.0mmEdge unstraightness≤1.0mm/mPhysical/MechanicalPropertyItemItem DescriptionStandardConditionResults1DensityASTM D792-02Absolute alcohol,23ºC2.147g/cm32Water resistanceASTM D870-0299ºC, 2HNo visual Changes3Thermal ExpansionASTM D696-193.0μm/m·ºC4Heat deflection TemperatureASTM D648-07Heating rate:120ºC/hLoad:1.82Mpa94.8ºC5Shear ResistanceASTM D732-02Speed:1.3mm/min30.5Mpa6Shear Strength10528N7Tensile StrengthASTM D638-03Speed:500mm/min43.8MPa8Flexural StrengthASTM D790-07 method ASpeed:1.9mm/min Span:70mm99.5MPa9Flexural Module9390MPa10180oC Peel strengthASTM D903-98Seperation Rate: 152.4mm/min64kg/mm
Processing and InstallationThe machining performance of ZCP is similarto Aluminum Composite Panel (ACP), it can therefore be processed with same machines and tools being used for aluminum and ACP.