JNC waste oil distillation used motor oil recycling to diesel fuel refining plant can be used in different kinds of black engine oil,crude oil,plastic oil and shale oil,to get diesel and gasoline through distilled catalyst.
Pump the waste oil into the heater,and heat it to its working temperature via coal or fuel oil,gas.
The maximum working temperature is about 410 degrees.
The required diesel and gasoline can be obtained after catalytic distillation.
When the reaction of waste oil in reactor is complete,the machine will stop heating automatically,after that we can just remove the residue from the bottom of the tank and then it can be used again.
JNC waste oil distillation used motor oil recycling to diesel fuel refining plant
≡Reaction tank≡: wasteoil will be pumped into this tank from the primary filter
≡Heating system≡: by burning coal or fuel we can work the oil temperature up to setting value.This system equips with≡insulation system≡as well.
≡Catalytic system≡: waste oil reaches the expected temperature,via catalytic effect,and the gaseous hydrocarbons become gasoline and diesel compositions.
≡Cooling system≡: after the catalytic effect,the gasoline and diesel compositions will be condensed into liquid materials.
≡Temperature control system≡: to make sure the waste oiltransformed into gasoline and diesel.When the wasteoil is dried by distillation,it can stop heating timely.
≡Tail gas handling system≡: through tail gas system,a small amount of unliquefied gas left can meet emission standards.
Diesel: 86%-88%
Gasoline: 5%-6%
Oil Residue: 6%-8% ( which can be used as bitumen,the raw material for cement and bricks or heating fuel just as coal,after being cooled off to normal temperature )
JNC waste oil distillation used motor oil recycling to diesel fuel refining plant
1
Workingprinciple:wasteoilundertheactionofcatalystdistillationgetshighqualitydieseldirectly.
2
Noneedofacid,alkali,or activatedclaytorefinethefinaldiesel,justuseourplate-and-framefilter(carriedwithJNC)toremovetheimpurities.
3
Directlyheatingwithfuelorgas,whichissafe,convenient,practical,andenvironmental-friendly.
4
ThetotalcostofprocessingusedoilisonlyUSD21perton(includingfuel,electricityandcatalystcost).
5
Oil Output Rate:diesel 86%-88%,gasoline5~6%,oilresidue6~8%.
6
Differentfromotherequipmentonthemarket:JNC waste oil distillation used motor oil recycling to diesel fuel refining plantuses aspecialwayofheatingwithhighthermalefficiencysothatitdoesn'tformcarbondepositioneasily,whichgreatlyreducesyourmaintenancecosts.
7
Currentlyonthemarket,thedistillationisbasedoncoilheating,duetothetemperaturewhichcan'tmeetthetechnicalrequirements,theoilyieldonlyachieveto65%.
Thiskindofheatingmodewillmakeiteasytoscale.Moreimportantly,itneedshightemperaturepumpwhichisexpensiveandeasilybreakable.Theseweaknessesmeanyouneedhighcostoffrequentreplacementafter.
8
JNC waste oil distillation used motor oil recycling to diesel fuel refining plantissafe,reliableandverydurable.Andit'seasytooperateandlowonlaborintensity,only 1-2workersareenoughtomakethemachinework.
JNC waste oil distillation used motor oil recycling to diesel fuel refining plant
wooden case nude packing
(actual size depends on the daily capacity of JNC waste oil distillation used motor oil recycling to diesel fuel refining plant)