Water Flow Sensor/ Mass Flow Rate Calculator/Mass Air Flow Censor

UIDMF Coriolis mass flow meterIntroductionUCMF-1-Series Coriolis Mass Flow Meters' measuring principle is based on the controlled generation of Coriolis forces. The measurement would not be affected by the pressure, temperature, viscosity, density, etc. And the compensation calculation is not required. The structure contains two parts: Sensor & Transmitter. The Coriolis Mass Flow Meters are designed and manufactured based on the national standard of safe explosion proof. The Explosion- proof standard is EX d ib II C T5Gb.The mass flow meter does not measure the volume per unit time (e.g., cubic meters per second) passing through the device; it measures the mass per unit time (e.g., kilograms per second) flowing through the device. The accuracy of the Coriolis Mass Flow Meters is ±0.1%~ ±0.2%. The application range is large. (It could be used to measure all sorts of all sorts non-newtonian fluid, slurry,suspensions, high viscosity fluid, etc.) The requirements for the installation are low. (The straight pipe requirements in front of and behind the Coriolis Mass Flow Meters are low.) They are more reliable, stable, and the maintenance level islow.TechnicalParameters
ApplicationsSuitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurementMaterial of theMeasurement PipelineSS 316L/ HCHastelloyPressurePlease refer to the chart shown above. Special orders would be placed for highpressure.
MediumTemperature-50ºC~+150ºC; (Highest Temperature:+350ºC;
Lowest Temperature: -300ºC could be special ordered.)EnvironmentTemperatureSensor:-40ºC~+150ºC;Transmitter:-20ºC~
+70ºCFlow Rate MeasurementAccuracy± 0.2% ,± 0.1%optionalDensity MeasurementAccuracy±0.002g/cm³,±0.001g/cm³optionalRepeatability±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)x100]% FlowRate
OutputSignal4~20mA Load Resistance<500Ω(Instantaneous
or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 CommunicationExplosion- ProofSymbolEX d ib II C T5Gb
Model selection
Micro Flow Meter- DMF-1-1;DMF-1-2
ModelDNMeasurement scope ( kg/h )Work Pressure ( MPa )Connection type (mm)DMF-1-1-AB1.50~40~32Weld Joints Φ6x1.5DMF-1-1-A30~400~32Weld Joints Φ6x1.5DMF-1-1-B60~1000~25Weld Joints Φ10x2DMF-1-2-A80~2000~20Weld Joints Φ10x1Medium-Small Flow Meter: DMF-1-3; DMF-1-4;DMF-1-5-A
Model
DNMeasurement scope (kg/h)Work Pressure (MPa)
ConnectionType(mm)DMF-1-3-A100~5000~25Weld JointsΦ20x4DMF-1-3-B150~10000~25Weld JointsΦ20x3DMF-1-4200~30000~25Weld JointsΦ20x2DMF-1-5-A250~100000~25Weld JointsΦ31x3
Large-scale Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5;DMF-1-6High pressure could be special ordered.(4~70MPa)
Model
DNMeasurement scope (t/h)Work Pressure (MPa)
ConnectionType(mm)DMF-1-3-A100-0.50~4Flange10DMF-1-3-B150-1.00~4Flange15DMF-1-4200-3.00~4Flange20DMF-1-5-A250-100~1.6Flange25DMF-1-5-B400-200~1.6Flange40DMF-1-6-A500-300~1.6Flange50DMF-1-6-AB650-500~1.6Flange65DMF-1-6-B800-1000~1.6Flange80DMF-1-6-C1000-1500~1.6Flange100DMF-1-6-CD1250-2000~1.6Flange125DMF-1-6-D1500-3000~1.6Flange150DMF-1-6-E2000-5000~1.6Flange150
UICMF Coriolis mass flow meterIntroductionUICMF Coriolis mass flowmeters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, or slurries. UICMF meters offer the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressuredrop.Features1.Unchallengeable UICMF performance on liquid mass flow, volume flow, and densitymeasurement
2.Unique design delivers unparalleled measurement sensitivity and stability
3.Guarantees consistent, reliable performance over the widest flow range
4.Designed to minimize process, mounting, and environmentaleffectApplication
Low Flow PrecisionMeasurementPrecision Measurement & ProcessControlHigh CapacityPrecision MeasurementStarting at 9.6kg/hrto120kg/hrKg/min -tons/hrUp to 1,000tons/hrFlavoringTruckloadingCustodytransferVialsInternalallocationShiploadingChemicalinjectionLeakdetectionRailcarloadingProduced fluidswithPipelinemeasurementchloridesMarinebunkeringFeedstock and fuelblending
Model selection
ModelNominalSize (mm)
Flow rate(kg/hr)Stability zero,kg/hRated Pressure(MPa)NW (KG)
GW (KG)0.2%0.15%0.1%UICMF-00330~96~1200.0180.0120.01240819UICMF-00660~540~6600.0990.0660.066201222UICMF-00880~960~12000.180.120.12201223UICMF-010100~1500~18000.270.180.18201124UICMF-015150~3000~42000.630.420.42201225UICMF-020200~6000~78001.170.780.78162034UICMF-025250~10200~135002.0251.351.35162135UICMF-032320~18 000~240003.62.42.4162745UICMF-040400~30 000~360005.43.63.6123555UICMF-050500~48 000~60000966124060UICMF-080800~120 000~160000241616890150UICMF-1001000~222 000~27000040.527278170245UICMF-1501500~480 000~6000009060606255360
SENSOR SPECIFICATIONS
1. Accuracy: ±0.1~0.5%Repeatability:±0.1~0.25%
2. Density measurement range: 0.5~2g/cm3, Accuracy: ±0.002g/cm3
3.Operating temperature: -50~+200ºC(standard), -200~+300ºCAmbienttemperature:-20~+60ºC or -40~+60ºC
4. The measuring tube material: SS316L; The housing material: SS304
5.Nominal pressure: 4.0MPa(standard)
6. Ex-proof: Exd (ia)iiCT6GbTRANSMITTER SPECIFICATIONS