Weihua 1t 5ton Cantilever Swing Arm Unloading Jib Crane

Lifting Weight: 0.5t~5t
Valid radius: 4m~5.5m
Lifting Height: 4m~6m
Releatedfixed crane
Features:
1.it is used for lifting 0.5t~5t stuff;
2.Ithas beautiful box-typed welded main girders. Computer optimized design for main girders with good performance and light weight;
3.Compact structure, light weight and high lifting height;
4.It's widely used in workshops, metallurgy, warehouses and assembly shops etc.
Mechanism:
1. box-type shaped by wielding;
2. High quality carbon steel Q235B and Q345B;
3. the girder connected by high strength screws;
4. Welding seams are tested by X-ray and ultrasound;
5. Forged wheels;
6. Compact structure, small volume and light weight trolley;
7. Lifting mechanism is open type winch trolley;
8. Compact reducer motor drive, step less control, hardened gears and safety disc brake;
9. Good operation performance, step less speed regulating and running smoothly;
10.Main girders Shot blasting sa2.5 after welding to release internal stresses;
11. Painting high quality epoxy zinc-rich primer, and the thickness of oil film is 140μm;
Electric System:
1. Power supply through step less slide lines;
2. Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time;
3. Control panel protection degree is IP54;
4. Reasonable components installation, convenient for check and maintenance;
5. Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;
Safety Protection Devices:
Overload limiter, limit switch (lifting and traveling), interlocking protection devices, buffer, track sweep plate, shield, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.
Specifications of fixed crane:
Model
BZD1
BZD2
BZD3
BZD5
Lift capacity(t)
1
2
3
5
horizontal throw(m)
5.5-10.5
5.5-10.5
5.5-10.5
5.3-10.3
Radius of gyration(m)
7-12
7-12
7-12
7-12
angle of revolution
180°/270/°360°
Lift height(m)
3-5
Lift speed
(m/min)
8/2,4/1
Travel speed
(m/min)
20
Power Supply
Three-phase A.C. 380V, 50HZ (As your demand)
Notes:The foregoing attached table shall only be used for reference. The actual applicationshall be appropriately modified according to customers' requirements.
Our after-sales service provide:
1. 14 months warranty when products leave the factory, or 12 months warranty after installation
and commissioning in addition to the human damage factors.
2. 2years spare-parts provided for better maintenance.
3.Professional technical staffs provide installation, commissioning and training services.
4.Delivery with English user manual, parts manual, product certification and other relevant certificates.
5.Technical advisory for any time and Engineers available to service machinery overseas.
Company name:Add:NO.6 Boai Road, Changyuan County, Xinxiang City, Henan Province, China.Contact person:Anna WangMob0086155 1585 1576Tel:TEL: 86-373-8887677