Where to Buy Coating Thickness Gauge for Car

Where to buy coating thickness gauge for carProduct OverviewThese gauges can be used for non-destructive coating thicknessmeasurement of non-magnetic coatings, e.g. paint, enamel, chromeon steel, and insulating coatings, e.g. paint and anodizing coatingson non-ferrous metals.
Function & Benefits
The objectof Measuring: This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
2 in 1 Probe:The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the type of the substrate(Magnetic or not), and calculate the coating thickness and display it fast.
Display:128*128 dot matrix LCD display, standard menu operations;
Measure Mode: single and continuous available;
Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in DIRmode, and not be lost in GEN mode. 80 readings can be stored for each group;
Calibration:Zero point calibration and multi-point calibration(up to 4 points) for each group;
Data Management: User can recall, delete specified readings, or delete group readings;
Statistics display:Simultaneously display Measuring Value,mean, minimum, maximum and standard deviation;
Three probe mode: auto, magnetic and eddy current;
Alarm: User can set a high or low limit alarm for each group;
Power Save: Power off automatically;
PC Connectable: USB interface to data transmission;Download readings via PC with EasyCoating Software.SpecificationModelEC-500AEC-500AFEC-500ANProbeF-Probe & N-ProbeF-ProbeN-ProbeMeasuring PrincipleMagnetic induction & Eddy CurrentsMagnetic inductionEddy CurrentsMeasuring Range0 to 1500um Accuracy± (3%+1um)Resolution0~99.9(0.1um) 100um~999um(1um) 1000um~1500um(0.01mm)
0mils~3.933mils (0.004mils), 3.934mils~39.39mils (0.01mils), 39.4mil~51.2mil (0.1mil)CalibrationOne point to four point calibration, zero point calibrationData GroupOne direct group(readings not be stored to memory)
Four general groups (readings will be stored automatically)
NOTE: each group have individual statistics, alarm limit settings and calibrationStatisticsNo. of readings, mean, minimum, maximum and standard deviationUnitsum , mm, milAlarmUser can set the high/low alarm limit ;Alarm icon displayed on LCD when over the limitMinimum Curvature Radius Convex1.5mmMinimum Curvature Radius Concave25mmMinimum Measuring AreaDiameter 6mmMinimum Thickness Of SubstrateF-probe: 0.5mm(0.02");N-probe: 0.3mm(0.012")0.5mm(0.02")0.3mm(0.012")Maximum Measuring RateTwo readings per secondComputer InterfaceDownload data via USBPower SupplyTwo 1.5V AAA batteryOperation EnvironmentTemperature: 0 to 40°C(32 to 104°F); Humidity: 20% to90%RHStorage EnvironmentTemperature: -20 to 70°C(-4 to 158°F)Standard CertificationROHS ;WEEE;CEDimensions110mm*53mm*24mm(4.33"*2.09"*0.94")Case Material And WeightABS; 92g(3.24 oz)