1.Plug in and power up your GiSC Socket.
2. Press the button for 7 seconds until the green LEDblinks like below:
2.1For 1st generation devices, when enter pairing status the LED blinks 1 time and repeat.
2.2 For 2nd generation devices, when enter pairing status the LED blinks 3times and on repeatedly.
2.3 For Android, please select the pairing method according to LED blinking way, click next.
For iOS, please go to phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter defaultpassword 12345678. Go back to GiHome, select the pairing method, click next.
3. It will auto-search and connect smart home device around you.
4. Input your home WiFi SSID & password
4.1 Your SSID must be letters or numbers.
4.2 If no password, keep it blank.
4.3Now GiHome only support 2.4G wificommunicationprotocol, 5G-WiFi-router is not supported.
5. Name the device to complete.
6. Maybe the device is "Offline" on GiHome, for the device needs 1 minute to connect with your router and server. When the green LED on, the device is "Online", if GiHome shows still "Offline", please close GiHome and re-open.7.The output voltage: AC 100V - 240V 50/60HzThe input voltage: AC 100V - 240V 50/60HzOperating temperature: 0ºC~40ºC