Wireless Primary Current Recorder Meter

GF2015 WIRELESS PRIMARY CURRENT RECORDER METER
GF2015 is a wireless primary current recorder equipped with a 433M for transmit the recorded data into the user's PC by our PC-link Software. It is a good assistant of power monitor system. The recording interval can be set from 1- 60 min. The PC-link Software can generate reports and create graphs for profile analysis.FEATURES
The Primary current recorder uses the same sensor technology as the original Rogowski Coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected.
The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. once on the line, it immediate begins to collect and record the primary current on the line.
The Primary current recorder is equipped with a 433M wireless port for communicating the recorded data into the user's PC. The data is downloaded through GF2015S PC-link Software, which allows the user to download, view and query the data stored on the Primary current recorder.
The housing of the Primary current recorder is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, repels water and is unsusceptible to flame. It also operates within a wide temperature range. The Primary current recorder has the screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions.
PC-link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through a 433M Port.
AMP RECORDER
Collect and analyze load profiles
Easily clamps to the line in seconds
Check for load balance
Patented open CT sensor with ±1% accuracy
433M communication with no annoying cables to connect
Recorded data quickly downloads into the user's PC
PC-link Software interface downloads directly into Microsoft Excel
Generate reports and create graphs for profile analysis
PARAMETERS
Basic parametersElectrical parametersRange of operationResolutionMechanical parametersEnvironmental conditionsRecording ammeter kit3 wireless current sensors (GF2015A, GF2015B, GF2015C)
433 HHT(handheld terminal) or 433M wireless data reader(GF2015R)
PC-linkSoftware software(GF2015S)
Carrying caseData recordinginterval5min, 10min,15min, 30min;
Interval user settable from 1-60minCommunication distance(wireless)100mCommunication433M, 868M or 915M (option)InstallationInstallation with electricity; Disassemble with electricityBattery3.6 volt lithium battery,19000mAh; Battery can be replacedSoftware requirementsPC-linksoftware & microsoft ExcelProcessor100 MHz or higher ( 200 MHz or higher recommended)RAM32 MB, 64M recommendedDrive space15 MB to load software, 10 MB of operating SpaceUse of positionOutdoor or indoorVoltage69kV,35kV,20KV, 10kV, 6kVCurrent1 to 100A, 1 to 300A, 1 to 600A, 1 to 1000A, 1 to 2000ASensor openingUp to 2.5 cm1 to 99.9A0.1A100 to 2000A1AAmps accuracy±1% of reading plus 2 countsFrequency60Hz (57-63 Hz) or 50Hz (47-53 Hz) models availableDimensions (WxDxH) (cm)18x9.5x4.62Weight (kg)0.58Operating temp.-40°C to 60°C