Zks Industrial Pneumatic Vacuum Conveyor for Powder

ZKS Industrial Pneumatic Vacuum Conveyor for powderViewJZKS vacuum conveyor is a new product developed on the basis of extensive absorption of similar foreign products. It is an ideal vacuum conveying equipment for powder material, granular material , and powder and granular material mixture. It can not only automatically transport various materials to the hoppers of packaging machines, injection molding machines, pulverizers, etc., but also directly transfer the mixed materials to mixers (such as V-type mixers, two-dimensional mixers, three-dimensional mixers, etc.) In addition, the labor intensity of workers has been reduced, and dust spills during filling have been resolved.ApplicationVacuum feeder is divided into two types : gap discharge type and continuous discharge type. The gap discharge type helps reduce the investment cost of the equipment and facilitates the control of material level. In most cases, we recommend users to use the gap discharge type. Continuous discharge type is generally used for vacuum transport of materials over long distances and high volumes.
The main parametersModelPower(KW)Capacity(kg/h)JZKS-11.5400JZKS-22.2600JZKS-33800JZKS-441200JZKS-55.52000Working principleJZKS vacuum conveyor use a vortex pump, so that the suction nozzle inlet and the entire system is in a certain state of vacuum. The powder and granular material is sucked into the material nozzle along with the outside air to form the material flow. It reaches the hopper through the suction tube and is separated to air and material.The separated material enters the receiving equipment. The feeding-discharging is accomplished by continuously opening and closing the pneumatic three-way valve, and the opening and closing of the pneumatic three-way valve is controlled by the controller.The vacuum feeder is equipped with a compressed air counter-blowing device. When the material is discharged, the compressed air pulse-pumps the filter to knock down the powder adsorbed on the filter surface to ensure that the suction material can operate normally.