Zlpg Series Spray Drying Machine for Traditional Medicine Extract

The machine adopts full seal form. All parts are made of stainless steel. It is equipped with three grades of filter. The filtered air is one hundred thousand grades. The cooling device of wall is installed at the cylinder body. It makes the wall temperature less than 80ºC. Air sweeping device is installed inside the drying tower. The product will not be burnt or deteriorated even stays on the way. The collection rate of powder is raised greatly. Moreover will not cause medicine mixed or wall sticking.
High-speed centrifuge atomizing for the extract of traditional Chinese medicine is an application of centrifuge atomizing technique. It is an high-speed atomizing dryer. The following problems are solved.
1. Raw material is stick to the wall and the rate of powder collecting is low.
2. Because the staying time of raw material at wall is long, the phenomenon of burnt and degeneration can be produced.
3. It is difficult to clean and can not meet the requirement of GMP.
4. Low in output: Model LPG-150 atomizing centrifuge dryer can process 50-60kg/h of raw material liquid
1. Adopted three-grade air filter, the inlet air is one hundred thousand grade.
2. Adopted wall cooling device, the temperature of inner wall will be on more than 80ºC. Even if raw material is stayed on the wall, it will not be burnt.
3. Its whole volume is 3.5 times of standard LPG high-speed atomizing dryer.
4. Adopted quick washing device, it is can meet the requirements of production for varieties if products.
5. Adopted wet-dedusting, there is no powder dust out. It is in conformity with the requirements of GMP.
6. Adopted air sweeping device, the clean effect is satisfied.
7. Equipped with two sets of atomizer and adopted frequency inverter control.
8. Adopted PLC control and display, and adapted frequency control.
9. Equipped with washing device on request.
10. Adopted the seal transport by dry air on request.ModelZLGP-25ZLGP-50ZLGP-80ZLGP-100ZLGP-150ZLGP-200ZLGP-300Evaporation capacity (kg/h)255080100150200300Treated volume of material liquid (Kg/h)25-3450-6880-108100-135150-203200-270300-406Output of finished product (kg/h)4.8-7.29.2-1414.8-22.418.4-2828-4236.8-56.455-85Solid content of material liquid (%)18-25Moisture content of finished product (%)3-5Electric power (kw)6399132153204246330Heating sourceSteam + electricityCollecting method of product and its efficiencyTwo-grade cyclone duster or one-grade cyclone duster and one-grade damp duster ≥ 95%Automatic control meters & instrumentsIndicator of hot air and exhaust air temperatureTemperature of air in (º C) 150-200Temperature of air out (º C)80-100Overall dimensions (mm)L70008000980011000122001410015000W4000500057006200700078009000H52006500760081009000985011100
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
1. Q: Please describe your warranty period.
A:15 monthsafter the equipment is arrived at the destination portor 12 monthsafter the installation and commissioning of the equipment, whichever comes first.2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.3. Q: How about the cost of on-site installation and commissioning guidance?
A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.