Zt260-P100 Powerful Rock Splitter with Excavator

P450 super large excavator uses rock splitter for non-blasting cracking
Description of Ultra large rock splitters:
Theultra wedge rock splittercan be mounted from a crane or a normal excavator for open pits or shafts, or mounted on a specialized carrier for horizontal tunneling. For large volumes of rock, there is simply no mechanical method more efficient, safe and silent than the Yamamoto rock splitter.
Application of ultra large rock splitters:
ultra wedge rock Splitterused in large volume of rock, steep terrain, mountain slope in the upper surface of the dangerous rock, Boulder, and foot from the villagers living area, and high voltage line tower is short, less than the general rock blasting (shallow hole blasting) the minimum distance of 300 meters of the construction project, the construction is very difficult. The lump ore (metals, non-metallic minerals) of the first and two mountain rock disintegration, Ultra Large Rock Splittercollapse, rock quarry mining, large concrete structures and the demolition of all local jobs and other areas.
ultra-large rock splittersoffer an alternative method for efficient excavation of large volumes of hard rock without the need for explosives, vibrations or fly rock. The splitter can be mounted from a crane or a normal excavator for open pits or shafts, or mounted on a specialised carrier for horizontal tunnelling.
The working principle is based on a two counter wedges inserted in a pre-drilled hole. A hydraulic cylinder pushes out a centre wedge between the counter wedges to spread them apart and the rock is split.Parametersof ultra large rock splitters:
Technical parameters of airborne split machinemodelSplit block length
mmdrilling depth
mnominl workig pressure MPadisruptive forceTcrack widthOpposite hole form
Machine weightKGZT220-P90800-9001300mm24-253300-
360025-
30The chain of manual hole600ZT260-P100950-10001700mm24-254400-
520030-25The chain of manual hole650ZTN450-P1001000-12002100mm24-25600030-25The chain of manual hole730
Precaution of operating ultra large rock splitters
For your better use of our ultra large rock splitters quarryto avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:
1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.
(Hole depth requirements: splitter front end of the block length + 900mm or more, for example: split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)
2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.
3. Do not use the splitter gun as a crowbar to use!