customized non woven face shield safety cup respirators mask ffp3 FFP2 with breath valve

Customized non woven face shield safety cup respirators mask ffp3 with breath valve

Environmentally friendly non-toxic

Standard

EN149:2001+A1:2009 FFP3

Material

Needle punched cotton+Melt Blown Filter+needle punched cotton+breath valve dust mask

The outer layer

non woven fiber, barrier outside dust particles

The filter layer

Melt Blown Filter

The inner layer

skin friendly fabric, low breathing resistance

Color

White

Delivery Time

within 7 days

How to wear

3 septs

How to Clean FFP3 face mask

1. Cleaning. Gently rub the gauze mask with warm water and soap first. The bowl-shaped mask can be gently cleaned with a soft brush dipped in detergent, and then washed with water. Please be careful not to rub hard, because if the warp and weft gap of the gauze is too large, it will lose the effect of preventing droplets.2. Disinfection. Soak the cleaned face mask in a 2% peroxyacetic acid solution for 30 minutes or cook in boiling water for 20 minutes or put it in a steamer for 15 minutes, then dry it for later use. This method is suitable for gauze masks and bowl masks.3. Check. Before using it again, you should carefully check whether the masks and masks are still intact. For the gauze masks and masks, you can use the light transmission