face dust mask machine low price machine.dust mask making machine

Product Description

Face Mask Machine

This machine is mainly used for the automatic forming of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; the entire length of the bridge is pulled and unrolled. Ultrasonic welding to the seal, then ultrasonic side sealing, cutting and shaping with a cutter; conveying the mask to the two mask earband welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, The pipeline is transported to the flat belt line for collection.

Main Equipment

Equipment size: 6850mm (L) × 3600mm (W) × 1900mm (H);Appearance color: RAL9003, according to this standard without special instructions;Equipment weight: ≤5000kg, ground load ≤500KG / m2;Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW;Compressed air: 0.5 ～ 0.7 MPa, using flow rate of about 300L / min;Working environment: temperature 10 ～ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness no less than 100,000 grade).

Equipment production capacity:(1) Production efficiency: 90-110ppm;(2) Qualification rate of equipment production: 98% -99% (except when the incoming materials do not meet the requirements or employees' improper operation is excluded)(3) Equipment failure rate: 3% (refers to the failure of the equipment itself)(4) Equipment staffing: 1 person (1 person can monitor 1 to 3 production lines at the same time)

No.

Part Name

Quantity

Comments

1

Water filter cloth / filter cotton / water absorption layer place roll mechanism

3 sets

Max 4 sets ，randomly with 3 sets

2

Nose bridge strip placed roller mechanism

1 set

3

Nose bridge straightening mechanism

1 set

width 3-7mm

4

Nose bridge strip driving ，cutting mechanism

1 set

width 3-7mm

5

Cloth hemming mechanism

1 set

6

Roll welding edge sealing mechanism

1 set

two side

7

Cloth driving mechanism

2 sets

8

Cloth fan folding mechanism

2 sets

9

Roll welding side seam mechanism

1 set

10

Roll-sealing mechanism

1 set

11

Transfer line

3 lines

12

Shunt institutions

2 sets

13

Ear band welding machine mechanism

2 sets

14

Cutting line

2 lines

15

operating system

1 set

16

Operation panel

1 set

Product process

Raw material-Forming-Nose Bridge filling-Hemming and pressing-Mask body welding-Cut-Delivery and shunt-Ear spot welding-Collect- Package-Disinfection sterilization-parsing (EO）-Finished product shipment

In order to realize the above manufacturing process, our company is equipped with fully automatic production equipment. Fully automatic equipment is integrated, 1 set mask cut slice machine drag 1 or 2 sets ear spot welding machine,it can be automated from raw material feeding to packaging.

Finished product

How Medical Masks Work

Most medical masks are self-priming filter masks. The working principle is that the air containing harmful substances is filtered through the filter material of the mask and then inhaled or exhaled.

Type

Project

Specification

Time

Remark

Disposable medical protective mask

Production and Package

150000 pieces

25hours

Loading，shipping，discharge

150000 pieces

8hours

Disinfection

Sterilize

150000pieces

24hours

10 cubic sterilizer

Regular parsing

14 days

High temperature, ventilation analysis

above 7days

Test

Ear band tension

20-30pcs/time

15 minutes

about 3hours

Respiratory resistance

30 minutes

Bacterial filtration efficiency

30 minutes

Particle filtration efficiency

30 minutes

Synthetic blood penetration

30 minutes

Ethylene oxide residue

30 minutes

Microbial index

3 days

Microorganisms need to be cultured in a laboratory environment

Services

The seller is responsible for sending the equipment to the buyer's factory and completing the installation and commissioning of the equipment. If there is a problem during commissioning, the seller is responsible for solving the problem.The buyer must comply with the relevant regulations of the seller's installation site;

Equipment assembly training—Training of equipment personnel for the assembly and maintenance of equipment. Usually, when the mechanical assembly is performed, the buyer sends an engineer to the manufacturer to master the basic specifications, composition, characteristics, etc.

After receiving the buyer's failure notice, the seller should implement the warranty obligation, respond within 8 hours, and give a solution within 24 hours to reduce the buyer's loss. If the repair requires other accessories, the seller will assist in the procurement, installation and commissioning, and the problem needs to be resolved within 48 hours.In order to ensure the capability and quality of the device, please follow the specifications and parts and materials required for use.