full automatical high speed 80000 pcs per day surgical face mask machine

full automatical high speed 80000 pcs per day surgical face mask machine

High-speed flat ear band type full automatic mask making machine

Equipment overview:
This machine is mainly used for the automatic forming of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; the entire length of the bridge is pulled and unrolled. Ultrasonic welding to the seal, then ultrasonic side sealing, cutting and shaping with a cutter; conveying the mask to the two mask earband welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, Pipeline to flat belt line collection

Equipment installation and configuration requirements

(1) Equipment size: 6500mm (L) x 4500mm (W) x 1900mm (H);
(2) Appearance color: international standard warm gray 1C (winning standard color), unless otherwise specified, follow this standard;
(3) Equipment weight: ≤5000kg, ground load ≤500KG / m2;
(4) Working power: equipment 220VAC ± 5 , 50HZ, rated power about 9KW;
(5) Compressed air: 0.5 ~ 0.7 MPa, the use flow rate is about 300L / min;
(6) Operating environment: temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness no less than 100,000)

Applicable raw material specifications
1 Earband: 5mm
2 nose bridge strips: white 3x0.5
3 Meltblown non-woven fabric: flat fabric 175mm, roll diameter 50cm
4 blue PP non-woven fabric: flat fabric 180mm wide, roll diameter 50cm
5 white PP non-woven fabric: flat fabric 200mm wide, roll diameter 50cm

Part Name
1 Water filter cloth / filter cotton / water absorption layer unwinding mechanism
2 Nose bridge strip unwinding mechanism
3 Nose bridge straightening mechanism
4 Nose bridge strip driving and cutting mechanism
5 Fabric hemming mechanism
6 Roll welding edge sealing mechanism
7 Cloth drive mechanism
8 Cloth fan folding mechanism
9 Roll welding side seam mechanism
10 roll seal mechanism
11 Transfer Line
12 shunting mechanism
13 Ear band welding machine mechanism
14 cutting line
15 Operating System
16 Operation panel

Production specifications:
Standard type: 175 * 95mm

Required component configuration list and brand
1 cylinder, Yade passenger
2 Solenoid valve, Yadeke
3 Servo motor, Siemens
4 PLC, Siemens
5 bearing, KSC
6 Linear Rail, Taiwan Shangyin
7 Fiber, Amplifier, Omron
8 Touch screen, Siemens
9 Relay, Omron
10 button, Schneider