hot salable automatic medical mask machine

hot salable automatic medical mask machine

size of connecting part 3300*2700*1160mmsize of the whole machine6500*2800*1800mmequipment voltage200v- 50/60HZequipment capability90-120 pcs/minequipment voltage0.5 ~ 0.7MPa, flow rate about 300L / minequipment power8.5 kwequipment weight1600KGOperating environmenttemperature 10 ~ 35 ℃, humidity 5-35% HR, no combustible, corrosive gas, dust (cleanliness no less than 100000)ground bearing not more than 500kg square meter This machine is a full-automatic mask machine, one body machine is connected with two ear belt machines, and the output can reach 90-120 pieces per minute.The turning mechanism of the main body machine turns the mask plate onto the conveyor belt connecting the ear belt machine, and then transmits the mask plate to the top of the first mask plate on the front of the ear belt machine through the conveyor belt. Finally, the mask piece is prevented from entering the mask plate of the ear belt machine by the air cylinder pressing down, and then the ear belt machine completes the actions of ear belt welding and edge wrapping of the mask, so as to complete an ear belt.For the production of mask products, the machine adopts PLC and touch screen control. The main conveyor belt adopts single-phase motor for conveying and step motor for turning.Accurate transmission, stable control, adjustable speed, clear and firm product embossing, good fusion effect.

hot salable automatic medical mask machine advantage:

The equipment can be produced at the same time:

1. "Medical protective mask", "disposable general medical mask" and "medical surgical mask" such products need to apply for "medical device product registration certificate" and "medical device production license" from the equipment department of the provincial food and drug administration. At present, all of them need a clean workshop with a level of 100000 or above, and have the ability of microbial experiment and related physical and chemical experiments .

2. For the labor protection mask (special labor protection articles), it is necessary to apply to the Provincial Technical Supervision Bureau for the production license of industrial products, and apply to the State Administration of work safety for the certification of "special labor protection used for safety signs" (LA certification)

3. The daily protective mask, without any license, can be produced and sold by sending the product to a qualified third-party testing agency for inspection and obtaining a qualified testing report

FAQ:

1. What is the demand for raw materials in normal production?

(1) SS non-woven outer layer (dark): 1. Material weight 25g / square meter, 2. Material width: 200mm 3. Cutting length 175mm 4. Single piece weight 0.875g

(2) White melt blown non-woven filter layer: 1. Material weight 22G / square meter, 2. Material width 180mm, 3. Cutting length 175mm, 4. Single piece weight 0.693g (filter index 90%, 95%, 99.99% can be used)

(3) SS non-woven inner layer (light color) 1. Material weight: 25g / square meter, 2. Material width: 210mm 3. Cutting length of each piece: 175mm 4. Single piece weight: 0.91875g

if you have any question, please feel free to contact following information: