300ton 5 Layers Veneer Hot Press Machine/Woodworking Machinery

Laminating hot press is fit for the furniture factory or panel secondary processing plant, which can make lamination for furniture panel,building partition, wooden door or laminate all kinds of decorative material on man-made board. It also can be used for drying or leveling veneer.
Main features:1. Solid drilled conduction board adopted, warming up faster,uniform thermal conductivity, and energy consumption lower.
2. Omron or Schneider brand main electric components,stable and durable.
3. Hawe valve from German for auto-open hydraulic valve, high holding pressure, reliable performance, less human factors.
4. Piston mode for cylinder. Grind, plate hard chromium on the surface and Polish piston
after heat treatment. It is durable and high precision. Special seal-rings adopted,reliable and durable.
5. Mylar for in and out of the hose, external spoke flexible reinforced, long using cycle and difficult to damage.
6. Configure pull E-stop switch, temperature secondary protection equipment.ModelBY214X8/30(5)Z2RCBY214X8/20(5)Z2RCTotal pressure3000kN2000kNWorking layers55Unit pressure8.1kgf/cm25.4kgf/cm2Platen No.& Size5-2700x1370x42mm
1-2700x1370x42mm5-2700x1370x42mm
1-2700x1370x52mmCylinder No.& diameter6-Φ150mm5-Φ150mmHeating wayelectric heated with thermal oilelectric heated with thermal oilPlaten opening wayautomaticautomaticInstalled power77.5kw77.5kwClosed speed50mm/s34mm/s