50kN lever type force standard machine
0.03% accuracy dead weight loading with accuracy 0.03%Introduction
The 50kN lever type force standard machine is taking dead weight mass as the standard load, and automatically and smoothly applies the load to the load cell to be calibrated.
It is used for testing and calibration of tension and compression load cell, also can be used for testing and calibration of proof ring. This machine includes main frame, control cabinet, computer and software, etc.SpecificationsModelLFS504Capacity50kNAccuracy class0.03Force accuracyBetter than ±0.03%Measurement range500N-50kNRepeatabilityBetter than 0.015%Sensibility0.2N without loading, 0.003% of maximum force, whichever is biggerDead weight mass errorBetter than ±1x105Dead weight mass50N, 10 pcs
500N, 9 pcsLever ratio1:10Uncertainty of amplification(k=2)0.01%Lever levelBetter than 0.3/1000Compression space450mmTension space450mmCrosshead speed100mm/minTop and bottom pull head center alignment≤Φ0.5mmDead weight tray lifting speed40mm/minDistance between dead weigth15mmMotor for levelingServo motor, 1.5kWMotor for lockingInduction motor, 140WSmall dead weight loading motorInduction motor, 60WBig dead weight loading motorInduction motor, 180WDimension (Length x Width x Height)2460x600x2380mmAccessoriesNameQTYMain frame1Lever assembly1Levelling device1Lever locking device1Big dead weight (500Nx9) and loading device1Big dead weight (50Nx10) and loading device1Controller1Software1Computer1
Structure
Electronics controlSoftwareBe able to connect to different types of signal monitor: 2000, JN338M-A, DMP2000, DMP40, and Keithley 2182.Automatic reading of signal monitor.Automatic verification of each point.Semi- automatic verification of each point.Manual control of loading.Automatic calculation of forward and backward of reading error and repeatability error.Automatic saving test data.Export verification data to Excel.Generate and print test report.
Test interface (English version can be available)