Aci-318 Standard Threadless Cold Press Rebar Sleeve

Product Description1. Reinforcing Bar Swaging coupler:
2. Specifications:
The parameter for standard couplers, we can also produce according to your requirement!
Steel bar diameter(MM)Outer diameter of coupler (MM)Length of coupler (MM)1630130183413020361202240132254515028501683256192366321640702403. The parameter of Reinforcing Bar Swaging Machine
NameNet weightWooden cas
e inner net
sizeWooden case
outside
sizeRemarkYJ650139kg650*520*760(packing one oil pump)30kg730*570*950(0.4)motor pow
er:3.0KWJY800145KG900*650*760(packing two oil pumps)40kg730*570*950(0.4)
motor pow
er:3.0KW
4. Description of Reinforcing Bar Swaging Machine:
Reinforcing bar YJ650 cold extrusion press machine is aportable system designed to splice bars in site. It is asimple and proven method to splice bars that did not have their end shop-prepared.
The sleeve is swaged onto the bar ends by an hydraulic tool powered by aseparate power unit. The resulting connection guarantees atensile strength of at least 125% of the nominal yield strength of reinforcing bars grade 500 MPa.Couplers are butt-to-butt splices that are suitable to both tension and compression applications.5. Installation Instructions
1.Site Preparation :cleaning and straightening of bars.
2.Marking on the bars half the length of the sleeves.
3.Put RG coupler into the gauge length for limit gripping area and then mark on RG coupler of both sides.
4.Sample after marking show the position that we should not to do gripping out of marking area from the
middle to outside.
5.Prepare the hydraulic tool and place the proper grip mould. And prepare the hydraulic pump and connect
power. Correct motor rotation by selector switch in case of 380/440V motor.
6.Insert the sleeve half way onto the continuation bar, using the marking as guide.
7.Start applying the required pressure on the sleeve.
8.Stop the swaging at the specified pressure for the given bar diameter.
9.Repeat this process as many times as required per model.
10.Prepare as many continuation bars as needed.
11.Place the continuation bars into the sleeves of the first bar.
12.Repeat swaging process on the continuation bar.6. Applications:
Jeddah Water Pump station in Saudi Arabia7. Competitive Advantage:
1. For repair or retrofit works.
2.Fits any cold shear cut bar end.
3.No reduction of the cross section area of the bar.
4.All sleeves are individually marked allowing full traceability of material origin and manufacturing batch.
5.Manufactured under quality assurance ISO 9001.8. Packing of Reinforcing Bar Swaging Machine:
9. Quality control of Reinforcing Bar Swaging coupler and application on job-site:
10. FQA:
Q: Are you trading company or manufacturer ?
A: We are factory. We are the FIRST manufacturer of rebar coupler since 1987.Q: How long is your delivery time?
A: Generally it is within 5-10 days if the goods are in stock. or it is within15-20 days if the goods are not in stock, it is according to quantity.Q: Do you provide samples ?Is it free or extra ?
A: Yes, we could offer the sample for free charge ,but clients do not need to pay the cost of freight.Q: What is your terms of payment ?
A: Payment 100% in advance.Can communicate.
B:All the payment go through Aliababa onetouch or Alibaba assurance payment
Q: How can Iknow the quality of JBCZ rebar coupler?
A: We can send you FREE SAMPLE to do test, or you can send us your rebar, we link it with our rebar coupler, then send back to you, if the test result is bad, we will pay you for the courier charges.Q: Where is your company?
A:Our company is located between Shanghai and Nanjing China, if you arrive at Shanghai Airport, we are glad to pick up. It will take 2to 3hours from the Airport to our company by Car. You are very welcome to visit us!