China 1550ust Aluminium Extrusion Press Equipment

1. Picture
EXTRUSION PRESS 15 mn(1550UST) (∮152 MM)
This press consists of the main cylinder assembly, the end platen assembly, four heavy tie rods connecting these two parts, four heavy pre-compressed tubes, the cross head with stem slide mechanism carrying the extrusion stem, the container, the billet loader, the cassette type die changer, the shear with discard knocker and hydraulic units.
2. ParametersPress capacity ....................................... 15 MNWorking pressure ................................. 28 MPaBillet diameter....................................... 152 mmBillet min. length .................................. 400 mmBillet max. length ................................. 900 mmTheoretical Extrusion speed at 15 MN max 24 mm/secMinimum Extrusion speed .............. 0.2 mm/secNon extrusion time (Theoretical time at no load cycle)No longer than 15 sec at 50 Hz including Upset, Decompression and Burp cycle time in flat die cycle at no load cycle. (Calculation value)The approximate weight of the press..................92T Diameter ............................................. 350 mmLength.................................................. 350 mmElectrical motors.................................... 400 kWHeating container power.......................... 30 kWTOTAL................................................... 430 kWCooling water flow rate (average)..... ca. 25 m3/hTemperature max....................................... 35°CPH .......................................................... 7 / 8,5Pressure................................................. 3/6 barMaximum hardness................ ........ ........ ....................................................12° FOil quantity for the tank (included the piping) …......................................................... ca. 5.000 Tension............................ 3 -415 V AC +/- 10%Frequency..................................... 50 Hz +/- 2%PLC...................................................... 24 V DCSolenoid control for electro-valve.................................................................... 24V DC..................................................................... Push button and lamps......................... 24 V DCFrequency................................................ 50 HzNumber............................................................ 1Working pressure.................................. 28 MPaMain ram diameter................................ 780 mmPower ............................................... 13.37 MN Number .......................................................... 2Working pressure.................................. 28 MPaBore diameter....................................... 200 mmRod diameter ...................................... 150 mmForce power in Forward........................ 1.75 MNForce power in Backward ...................... 0.7 MNMain cylinder and side cylinder force . 15.12MN Number .......................................................... 4Pressure................................................ 25 MPaBore diameter ..................................... 160 mmRod diameter.......................................... 90 mmSealing force at 25 MPa ........................ 2.0 MNReturn force for container opening at 25 bar..................…0.82 MNNumber .......................................................... 1Working pressure ................................. 28 MpaBore diameter....................................... 160 mmRod diameter ...................................... 110 mmShear force ......................................... 0.56 MNAscending force..................................... 0,26MN
3. Our Company
Zhuozhou Yesheng import & Export Co.,Ltd. is mainly engaged in supplying aluminium processing equipment such as continuous caster, cold mill, foil mill, tension leveler, cut-to-length line, slitting line, foil doubling machine, color coating line, degasser and filter, plate filter, circle blanking line, foil container production line, slab caster, slab milling machine, slab saw, melting furnace, holding furnace, annealing furnace, aging furnace, steel spool, work roll, backup roll, caster roll, and caster tip etc. and the spare parts for the above equipment. And we also supply extrusion line such as press, tunnel furnace, handling equipment, DC caster, homogenizing furnace, anodizing line, powder coating line etc.
China make equipment are very popular all over the world especially in south east Asia, African countries, South America, Middle East mainly because of reasonable price and good quality. However, for every equipment there are many manufacturers. Some are reliable and some are not. Most of customers are confused and don't know which suppliers are reliable. My company's main business is to help these customers find reliable suppliers for any equipment with good quality, reasonable price and perfect after -sale services.
4. Service Assurance
1. Provide 24-hour technical support by email or phone.
2. Provide professional solutions suitable for the production line, according to the requirements of customer investment and production capacity,
3. Provide spare parts list
4. Provide foundation layout and layout for the factory
5. Assign professional engineers to the site to guide the installation and commissioning, according to the customer's requirements until the final product meets the customer's requirements.
6. Provide good after-sales service, long-term real-time tracking of user's field equipment use, and provide timely and effective life-long service for users.
7. If you want to adjust the production line, develop new products or improve equipment, we will provide long-term technical services.