China 300 000m3 AAC Block Machine AAC Block Machine Line

300, 000M3 AAC Block Machine AAC Block Machine Line
Our Foamed concrete light weight(AAC: Aerated Autoclaved Concrete) brick machine absorbed world advanced technology And could meet different client's requirement. We have built 5 lines abroad. Our AAC production line is famous for its excellent performance, high efficiency, and lower in energy consumption. Since putting into the market, good economic profits and social benefits have been achieved.
1. AAC block machine line Introduction
Areated concrete brick (light brick ) is the light and porous buidling material. It has light Keeping temperature cant burn and other advantages. It can be made into many kinds of bricks(for Example: 600x 200x 100, 80x 80x 180, 240x 115x 53, 600x 200x 125), they could be used industry building and common building. They are more and more popular in the world. In the future, they will replace the Clay brick completely.
2. AAC block machine line common conception
Common concrete density is usually 1600-2400kg/m, but Areated concrete are 500kg/m3, 600kg/m3, 700kg/m3. It has not the big grain, main use silicon material (for example: Coal ash, sand, stone dust And others ), through making the material small for example sand, they can be used directly if has Enough degree of small (for example coal ash. Mixing calcium material lime cement water to a Special slop, then add the aluminum dust and the additive. Make the aluminum dust and the special Slop have a Chemical reflect. Then produce Hydrogen to make the concrete slop to expanding or Swell, foam. Next, put them into the curing room to concreting cutting steaming curing, last, there will Bacome the light brick, the porous rate is 70-80%.
3. AAC block machine line Advantages
(1)light weight
Areated concrete density is usually 400-700kg/m3, (according the market in produce ), same as 1/3 of clay brick and 1/5 common concrete. So use the Light brick can reduce the weight of the Build more, and also reduce the beam of roof and pillar press best. Then you can see, it can save the Material and cost, it also fighting shaking.
(2) keeping temperature
It has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or 1/5 of clay brick, so it is best materials now in the world. There are many kinds material, have Lowest waste.
(3)Main Material: Coal ash sand waste mine material coal stonestone dust and other silicon materials.
We are the top leader in China on manufacturing the Autoclaved Aerated Concrete Line(AAC) with 65% market share. We have exported our lines to different countries -- Russia, Thailand, Ukraine, Middle East and so on.
We can supply our customer for designning, production, installation, commissioning, training and good after-sale service. Capacity: From 50000 cubic meter to 300, 000 cubic meters per year.
Equipments: Stocking raw materials, mixing, molding, forming, cutting, evaporating and curing, crane cramp, transporting etc.
4 Light Weight(AAC) Brick related parameters:
(1) Product weight is according to 600kg/m3 to control;
(2) annual capacity 300, 000m3;
(3) set raw material proportion: Cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350G/M3;
(4) water and material rate 0.631;
(5) one mould product 2.88m3;
(6) Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes;
(7) casting slurry temperature 38-42 degree;
(8) body quiet stop. Time is 1.5-2.5hours, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa;
(9) Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours;
nameunitcementlimefly ashflash%65-70cement%6-15lime%18-25gypsum%3-5Aluminum powder paste( 600kg /m 3 )1/100008Water & material rate 0.60-0.65Casting systemO C36-40Aluminum mixing timeS30-40
5.related equipments