Biogas Plant, Dry Desulfurization, Hydrogen Sulfide manufacturer / supplier in China, offering Dry Desulfurization Equipment for Removal of Hydrogen Sulfide, 10000m3 Biogas Plant From Cow Farm Waste by Anaerobic Digestion, 150kw Quality Commins Gas Generator for 1000m3 Biogas Plant and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | US $300000.00/ Piece |
Local Area: | Weifang, Shandong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T |
Power: | 20-200kw |
---|---|
Certification: | ISO |
Output Type: | AC Three Phase |
30kW Biogas Generator for Small Biogas Plant
Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat.
Typical composition of biogasCompoundFormula%MethaneCH450-75Carbon dioxideCO225-50NitrogenN20-10HydrogenH20-1Hydrogen sulfideH2S0.1 -0.5OxygenO20-0.5
Rated power (kW/kVA)30/37.5Rated current (A)54Size (mm) 1850*800*1430Weight (kg)950Gas engineRated speed (rpm) : 1500Number of cylinders: 4cooling method: Water coolingEngine oil consumption (g/kw.h): 2Air consumption (m3/h): 10Startup mode: 12V DC startGas Requirements1. The methane content is not less than 55%.2. The gas temperature should not be lower than 0 °C, and should not be higher than 60 °C.3. The gas does not contain other impurities (the impurity particle size should be less than 5μm).
Water content should not exceed 20g/Nm3.4. The calorific value of the gas is ≥8500kcal/m3. If the low calorific value gas (heat value <8500kcal/l) is used,
the power of the unit will drop slightly.5. Gas inlet pressure is 3-100KPa; gas booster is required to be lower than 3KPa, and pressure reducing device
is required above 100KPA.6. The gas must be desulfurized and dehydrated. Hydrogen sulfide <200mg/Nm3.