380V design 500head/shift output Galvanizing cattle Automatic Cleaning Slaughtering machine
Global diagram
Internal shower and gear
welding portion
workshop show
certify show
Repair:
Repair, adjust or replace parts immediately if they do not meet the requirements. The following requirements should be achieved in maintenance:
1the replacement should be the same as the raw material performance during maintenance;2maintenance and repair shall not be allowed when the machine is in working condition.
Inspection, maintenance, maintenance and troubleshooting methods:
1) Lubricating the rotating part frequently;
2) cleaning the equipment after each work to keep the body clean inside and outside;
3) because the machine is working in vibration state, the connecting bolt should be checked for looseness in the process of use.