China 600ton Coil Feeder Stamping Press Line

Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1.1 160ton-300ton

NameUnitXPE-160XPE-200XPE-250Model SHSHSHCapacityTon160200250Rated tonnage pointmm636373Strokemm180130250150280170Stroke per minutes.p.m30-5540-8520-5035-7020-4030-60Die heightmm450400500450550450Slide adjustmentmm100120120Slide areamm1600x6501850 x7502300x900Bolster areamm1800 x7602200x9402500 x1000Side openingmm700 x450900x600900x600Main motorKwxP15x418.5x422 x 4Slide adjust deviceKwxP1x42x42x4Air pressurekg/cm2666Presses precision GB(JIS)1 class GB(JIS)1classGB(JIS)1 class
1.2 400ton-600ton

NameUnitXPE-300XPE-400XPE-500XPE-600Model SHSH SHSHCapacityTon300400500600Rated tonnage pointmm7373106106Strokemm300170300170300180300180Stroke per minutes.p.m20-3530-5020-3020-4018-2520-3015-2520-30Die heightmm550450550450580480600500Slide adjustmentmm120120120120Slide areamm2300x900A:2300x10002900x10003100x1100B:2400x1000C:2800x1000Bolster areamm2500x1000A:2500x10003300x12003500x1200B:2800x1000C:3200x1000Side openingmm900x600900x6001000x7501100x750Main motorKwxP30x437x445x455x4Slide adjust deviceKwxP2x42x43x43x4Air pressurekg/cm26666Presses precision GB(JIS)1classGB(JIS)1 class GB(JIS)1classGB(JIS)1 class
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally advanced duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.

Standard Configuration:
Dry clutch brake
Standard operating system of xieduan
Operation Method Choice/inch stroke /safe journey/continuation of operating mode
Oil pressure overload protection device
Over-run safety device
Duplex magnetic valve
Misfeed detection device
Electric slider adjusting device
Digital moulding-height indicator (unit: 0.1 mm)
Electric butter lubricating device
Accumulative counter (6 digits)
Pre-determined counter (6 digits)
Maintenance counter (6 digits)
Service Life counter (6 digits)
Electronic rotary cam switch (6 connections)
Air-blast device 1/2" primary circuit
Air source connector 1/2" secondary circuit
Error inspection socket
Power socket (only apply to single-phase 110V power)

Optional Configuration:
Wet clutch brake
Die cushion device
Vs variable-speed motor
Touch-screen device
Photo-electric safety device
Knock-out device on Ram
Main motor inversion device
Foot switch
Safety dog and safety latch
T-type two-hand button operating platform
Inspection variable-connection magnetic valve
Anti-vibration mechanical foot
Quick Die Change Device
Upper die clamper
Lower die clamper
Die lifter
Mould-shift arm
Basic bolt and soleplate
Automatic feeder device
Three-in-one NC straightening feeder
NC Servo Roll feeder
Two-in-one feeder and straightening machine
Leveller