China 9 Positions Martindale Abrasion Pilling Tester

9 Positions Martindale Abrasion and Pilling Tester (GT-C13B)
Application
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
FeatureStandard: Lissajous figure.Working positions: 4, 6, 8, 9 optional. Counting Method: 1) count up. 2) count down.The unique design allows removal of individual sample holders for examination without lifting the top motion plate.Standard sample holders with 9 and 12kpa weights included.PLC, 7 inches color touch screen, Chinese and English operation interface. Weights and key components are made up by 316 stainless steel which is well-formed and durable in use.To prevent distortion, the top motion plate was special made up by 316 aluminum alloy.Key Specification

ModelGT-C13B-4GT-C13B-6GT-C13B-8GT-C13B-9Working positions4689Control modePLC control and touch screen displayCounter range0~999999 times
Test pressure
Abrasion testA)Specimen holder: (198 ±2)g
B) Larger loading piece: (597±5)g
C) The sum mass: (795± 7)g , for workwear , upholstery, bed linen and fabrics for technical use ( nominal pressure of 12kpa)A)Specimen holder: (198 ±2)g
B) Smaller loading piece: (397±5)g
C) The sum mass: (595± 7)g, for apparel and household textiles, excluding upholstery and bed linen (nominal pressure of 9kpa)Pilling testA) Stainless steel loading piece: (155 ± 1) g
B) Specimen holder: (260 ± 1)g
C) The sum mass: (415± 2)gHolder effective diameterA) Abrasion Holder: Φ(28.65 ± 0.05)mm B) Pilling Holder: Φ(90 ± 0.10)mm Rotational speed50± 2r/min Pressing weight Mass: (2.5 ± 0.5) kgDiameter: Φ(120 ± 10) mmPower supplyAC220V 50/60Hz Dimensions(L x W x H)60x55x41cm88x61x41cm90x62x41cm90x62x41cmWeight 75kg130kg145kg150kg

Standards
Abrasion: GB/T 21196.2, GB/T 13775, ISO 12947, ASTM D4966,
IWS TM 112, M&S P19, Next 18, SN 198529, TWC 112, JIS L1096, ( ISO17076-2 ball plate method ,optional)
Pilling: GB/T 4802.2, ISO12945-2, ASTM D4970, IWS TM 196, M&S P17, Next TM26, SN 198525