High Pressure Composite Material Autoclave, Composite Material Autoclave, High Pressure Autoclave manufacturer / supplier in China, offering High Pressure Composite Material Autoclave, Tank Surface Blast Cleaning Machine/Vertical Movable Rust Remove Blasting Machine, Vertical Movable Shot Blasting Machine/Shot Blaster and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Set | US $10000.00/ Set |
Local Area: | Qingdao, Shandong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Warranty: | 2 Years |
---|---|
Control Type: | PLC |
Automatic Grade: | Automatic |
Brief description
1.High quality, best workmanship
2.Easy Installation
3.Easy for splicing
4.ISO/CE/SGS
1. Features:
The HODO splice press is staimless steel for machine's boday case .this solution for splicing thermoplastic conveyor belts (e.g. PVC belts).have an external control box and a water-pump. Use for water cooling tank to water cycle cause the machine to cool.
User must outfit an air-pump for provide sufficient pressure. let the belts more tightly bonded.
The HODO presses are provided with electric heating and built in water cooling. The splice process runs fully automated.
1) Splice pressure is applied by an internal compressor, max. 2 bar (28 psi)
2) Heats up to a splice temperature of max. 200°C (392°F)
3)Keeps it at the splice temperature (adjustable dwell time)
4) Cools down to the cooling temperature (safe temperature to take the belt out)
5) For thicker belts a preheat temperature and preheat dwell time can be applied
6)The bottom heating can be set lower or higher than the top heating
2.HODO-Belts heating press splices advantages:
HODO1100 dual purpose heating press technical features :stainless body ,double balloon ,laser heating silica gel plates ,built-in direct cooling system.
1) It takes 20 minutes to heat up to 200°C,and takes 3 minutes to cool down to 60°C.The horizontal direction temperature error below2°C,completely meets the requirement of the belt joint.
2) Balloon adding pressure:0-3.0kg adjustable.
3) Intelligent digital display control :automatic heating ,automatic temperature control, automatically cut off power supply.
4) Pump water pump, use conveniently.
5) Two matched stainless platen ,the beams are firm ,durable and no distortion.
3.Operation steps
Before the heating press:
1 Put the belt connector (had been tooth fighted & fixed by air gun) on the mould flatly.
2 Put a small belt(the same thickness) at both sides to avoid the melting PVC overflowing.
3 Cover a piece of teflon on the belt.(function of Teflon : not sticking to melting PVC belt , thermostability & fast heat transfer ,heat evenly)
4 Cover the male mold, tighten the controlling nuts of both ends.
5 Open the power switch.
During the heating
Please keep the electric tension stable and don't disturb the heating press mold during the heating process.
After the heating press
1 Open the controlling nut ,move the male mold.
2 Cutting belts : coupled with a below the belt is often used for cutting gaskets. when cut through the lower die to prevent the cutting.
Tool Specification and Parameter
Tool Specifications
HODO1100
HODO1600
HODO2100
Effective length
1000 mm
1500 mm
2000 mm
Effective width
150 mm
150 mm
150 mm
Weight lower part
42 kg
70kg
94 kg
Weight upper part
47 kg
78 kg
102 kg
Total weight
89 kg
148 kg
196 kg
Length
1410 mm
1910 mm
2420 mm
Overall Height
310 mm
390 mm
390 mm
Max. pressure
2 Bar / 28 PSI
2 Bar / 28 PSI
2 Bar / 28 PSI
Max. temperature
200 ºC
200 ºC
200 ºC
Dimensions for transport
(L x W x H)
2060x 550 x 475 mm
2440x 610 x 480 mm
2950x 600 x 490 mm
Weight for transport
150 kg
230 kg
280 kg
Electric Power
3300W
4800W
6300W
Different kinds of presses in our workshop
Packaging and shipping
Export Seaworthy Simple Packing with PE Film
Or by Wooden Case Outside while PE Film as Inner
Or According to the Customers' Request
Our Services :
1. We will design,manufacture,install and test the machines according to customers' requirement .Relevant personnel training for customers,ensure that customers fully grasp the use and maintenance of technology.
2 .Our service department listen to customers' feedback at any time and provide spare parts timely.
Welcome to visit our factory and we can show you the machine in working condition:
If our products win your interest, please send us inquires and we will provide detailed information to you. We can also make non-standard machines according to your request.