China Aluminium Strip for Pex-Al-Pex Pipe

Aluminium strip for PEX-AL-PEX pipe
8011, 3003, 8006, 1050, 3005, 1100
Width: 20-600mm
Thickness: 0.06-1.00mm
ID: 150mm
OD: 500-1400mm
We have many models of aluminum cap closure sheet, such as 1060,1070,3004,3105,5052,5182,8011.

AlloyTemperThicknessWidth1060,1070O,H140.17-0.6mm50-900mm3004,3105O,H12,H14,H160.2-0.3mm 5052,5182H190.25:-0.5mm1280mm8011H140.17-0.23mm 800-1000mm

Application of aluminum cap closure sheet:
vial aluminium seals,aluminium tear off seal,aluminium flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle. ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off caps.
(1) 1070 aluminum strip for cosmetic cap
Signi aluminium hot rolled quality makes it is good for deep drawing, and 99.7% high purity let the cosmetic cap surface is very bright, and the surface is very soft and smooth, in conclusion signi aluminum 1070 O cosmetic cap strip is ideal for use on perfume bottles and cosmetic bottles, which need shining and bright surface, such as cream jar, perfume bottle, screw top bottle, cosmetic cap etc.

(2) 8011 1060 aluminum strip for injection vial seals
1060 8011 aluminium plain strip, 1060 8011 aluminium lacquered strip for Injection vial seals.

Signi aluminium offer 1060 aluminum strip for injection vial seals since long time ago, because 1060 strip is easy to make and cheap price, in many countries 1060 strip for injection vial is still very common, signi aluminum could offer plain aluminum strip, lacquered aluminum strip, coated aluminum strip in color of golden, white, red, blue, black etc, one sides color, both sides lacquered etc.

Recently Signi aluminium produce 8011 aluminum strip injection vial seals, which is quite popular in China, used for pull-off aluminum caps.


(3) Aluminum Sheet for Omnia Jar Cap
1.Chemical Composition : Alloy type 8011 H16 According to EN573-3

2.Size and deviations from the size:
-Thickness tolerance -0+0.5mm
-Width tolerance -0+0.5mm
-Length tolerance -0+0.5mm

3.Deviations of the forms/shapes:
- Deviations of the straight for hardness of the longitudinal border max 1mm
- Deviation of flatness--max 4mm
- Rectangularity: max difference in the diagonals--3mm
- Dislocation between the sheets--max 2mm