China Automatic Disposable Earloop Mask Making Machine

One. Use
This production line is mainly used for the automatic formation of ear-hook flat masks, which are transported under the flat belt and collected through the assembly line.
Two. FeaturesAutomatic tension control of raw materials to ensure that the tension of raw materials is balanced;Computer PLC editing control, high output, strong stability, low failure rate;Photoelectric detection of raw materials to avoid mistakes and reduce waste;Can produce 2 to 4 layers of masks;The machine has an automatic counting function;Replacing different molds can produce masks of different sizes and patterns;High accuracy of automatic feeding, fast speed;High degree of automation can greatly reduce the work intensity of workers;Independent operation box, easy to operate, all actions are protected by safety..Three. Equipment parameters

NO.Parameter itemsContent1Equipment size6500mm(L)x3500mm(W)x1900mm(H) 2Exterior colorInternational standard white + gray, follow this standard without special instructions3equipment weight≤5000kg, ground load ≥500KG / m24Working powerEquipment 220VAC soil 5%, 5OHZ, rated power about 12KW5Compressed air0.5 ~ 0.7MPa, using flow rate of about 300L / min6Use environmentTemperature 10 ~ 35 ºC. Humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanliness no less than 100,000)7Productivity80-120ppm (efficiency per minute)8Qualification rate of equipment production99% (Incoming materials do not meetAlarm & Security Systems requirements, except for improper operation by employees)9Drive wayMotor / Pneumatic / Servo10Feeding methodCoil11Operation methodAuto / Manual / Jog12Electric control modePLC

Four. Equipment structure and system configuration
1.Overview: This production line is mainly composed of body molding equipment, distribution line transmission equipment, earband welding equipment, finished product transportation line, air control system, electronic control system, etc. Zh
2.Body forming equipment: This module mainly includes automatic feeding mechanism, folding forming mechtallurgy-Machinery-p3748/">metallurgy Machinery anism and knurling and blanking mechanism. It mainly realizes the automatic feeding of fabrics, the integration and layered folding of multi-layered fabrics, the compaction of fabrics after folding, the side knurling and crimping of flat masks, and the function of split cutting.
3. Split line transmission equipment: This module mainly includes the flat mask split line mechanism and the material channel conveying mechanism. It mainly realizes that each flat mask is conveyed to two different silos after being sliced, and is conveyed by the cylinder bomb to the material path, and the material path is conveyed by the motor to the next station.
4. Earband welding equipment: This module mainly includes an automatic earband feeding mechanism, an earband cutting mechanism and an automatic placement fixed-point welding mechanism.It mainly realizes automatic feeding of earbands, cutting with a fixed length, and placing the cut earbands at a prescribed position on a flat mask, and the device automatically completes ultrasonic welding of earbands and masks.
5. Air control system: Compressed gas from an external source is purified by a precision water-gas separator. The pressure can be adjusted to provide a good gas environment for each circuit component. The valve body controls the accuracy of the cylinder piston. Position, using high-quality pneumatic components to ensure the sensitivity and stability of various actions during long-term use.
6. frame: the main frame of the equipment, the transmission line, etc. are assembled from aluminum profiles, and at the same time, warning signs are placed on the parts involved in personal safety.
7. Electric control cabinet: use PLC contLean Pipe & Pipe Rack System rol system, air switch adopts domestic high-quality air switMachinery for Food, Beverage & Cereal ch, Schneider button, other main electrical components such as select switch and intermediate relay are all OMRON products.
8. The installation of the electrical components of the equipment complies with the relevant national regulations and has a reliable grounding device. The terminals, contactors and small air switches in the electrical box are installed in the VDE standard V-groove. Each electrical component is clearly marked. The electric control cabinet uses all-plastic combing cabinets with wire trunking for clear wire numbers; the control panel is clean and the subtitles on the signs are clear and easy to see.
Five. Equipment maintenanceCheck the air pressure and the condition of each fastener daily to ensure reliable use.Regularly lubricate all moving parts and keep the equipment tidy.Regularly clean up the dust of the equipment to avoid affecting the operation and product quality.The normal working time of the equipment is calculated from 8-10 hours per day. If the working time is longer due to production, the inspection and update of wearing parts, motors and other accessories should be strengthened to ensure the stability of the equipment.Six. Delivery period
25 days after the prepayment.
Seven. Payment method
L/C or T/T
Eight. Services and otherThe supplier's technical staff is responsible for remotely instructing the purchaser's personnel for installation and commissioning; the commissioning materials are provided by the purchaser;The warranty period of the equipment is half a year (except damage caused by abnormal use and consumables); wearing parts are not included in the warranty scope. For details, please refer to the "wearing parts list" in the instruction manual.The abnormal quality of the equipment is received, and the supply and demand sides negotiate to resolve it;AfSafe ter the warranty period expires, the supplier charges labor and transportation costs for the maintenance of the equipment, which involves the replacement or purchase of equipment-related accessories, and the supplier only charges the cost.The product is delivered to the customer's designated place (domestic) on time, and the freight is responsible for by the supplier.This product is delivered randomly: a manual and a set of molds (if other specifications are required, the cost will be quoted separately).The buyer shall provide the power voltage / compressed air gas source and the grounding device in accordance with the electrical specifications on the site of the buyer.