Overall Characteristic
▪Exquisite appearance, touch keypad, long life time.
▪Three methods to open the door: Card, password or both.
▪Use as WG26 card reader.
▪Relay dry contact output and PUSH output.
▪Three modes of backlight.: NO, NC and automatic.
▪Have the function of tamper device and security operating mode.
The Picture of Access Control Keypad
Technical Parameters
ItemParameterOperating voltageDC 12V ± 10%Operating current< 100mADimensions120mm x 78mm x 22mmWeight130gAmbient temperature-10 °C-70 °CRelative humidity20%-80%Storage1000 usersCard type (alternative)EM(ID) card(IC card for option)Card reading distance1 - 15CM
LED and Buzzer Indicates:
Two-color LED: red and green:
Led stateAccess control statusLight red once every 1 sec ( Slow flash )Holding stateLight red, N.O.Programming stateLight green within open timeUnlocking statelight green once every 0.3sec (Fast flash)Pending further action
Built-in buzzer:
DescriptionStatus1 short buzzValid input3 short buzzInvalid input1 long buzzProgram successContinuous long buzzRestoring factory programming passwords
Other Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.