China Automatic Door Microwave Position Sensors

Safety Guide
Related components must have a separation of electrical safety devices with 10W voltage protection operating conditions. All installation and maintainence work must be carried out by the professionals.
Applicable Scope
Featured with high sensitivity , quick response and detection accuracy to meet different kinds of autodoor requirements .
Name of Components
1.Luminous diobe
2.Sensibility adjust screw
3.MDV sensor module
4.Wire plug
Open the Shell
Not being installed
Being installed on the wall
Drilling
Installing on the wall, use the attached template to drill holes, installing on celling, use the attached template to drill holes.
Fixing
The screws are pre-placed on the bracket.
Remove the screws, fixed the main sensor body on the wall.
Operating
▪When the power be offered, microwave sensor starts to detect the environment around.
▪keep the microwave sensor beyond the detection area for 5s.
▪Stand at different position to detect the detection area.
Picture of Microwave Sensor



The Internal Structure
Adjust the Detection Area
Adjust the Detection Position
Rotate the bracket of microwave sensor to form an angle ( 10-60 degree ) between the MDU sensor module and installation wall in order to adjust the detection area.
The Possibility of Interference
▪Raining
▪Wind Blowing
▪Vibration
▪Lighting
The Technical Details
Power supply: AC/DC12-36V
Current consumption: Static current 45mA
Action Current: 105mA
Environmental Temperature: -20ºC~+60ºC
Environmental Humidity: 0-90%, without condensation
Wave Form: X▪Band 10.525GHZ
Output:<=20dBm
Relay Output: N.O.▪point output ( Relay )
Maximum Voltage: 48V AC/DC
Maximum current: 0.5A AC/1.0A DC
Minimum Switching Power: 1mA
The Largest Power Switch: 55VA/24W
Weight: 220g
Protection Level: IP54
Size: 131(L)x61(W)x46(H)mm
Other Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.