China Automatic Door Microwave Sensor

Microwave sensor Technical Details
Power supply: AC/DC12-36V
Current consumption: Static current 45mA
Action Current: 105mA
Environmental Temperature: -20ºC~+60ºC
Environmental Humidity: 0-90%, without condensation
Wave Form: X▪Band 10.525GHZ
Output:<=20dBm
Relay Output: N.O.▪point output ( Relay )
Maximum Voltage: 48V AC/DC
Maximum current: 0.5A AC/1.0A DC
Minimum Switching Power: 1mA
The Largest Power Switch: 55VA/24W
Weight: 220g
Protection Level: IP54
Size: 131(L)x61(W)x46(H)mm
Microwave sensor insatllation safety guide:
Related components must have a separation of electrical safety devices with 10W voltage protection operating conditions. All installation and maintainence work must be carried out by the professionals.
Microwave sensor applicable scope
Featured with high sensitivity , quick response and good detection accuracy to meet different kinds of autodoor requirements .
Name of Components
1.Luminous diobe
2.Sensibility adjust screw
3.MDV sensor module
4.Wire plug
Open the Shell
Not being installed
Being installed on the wall
Drilling
Installing on the wall, use the attached template to drill holes, installing on celling, use the attached template to drill holes.
Fixing
The screws are pre-placed on the bracket.
Remove the screws, fixed the main sensor body on the wall.
Operating
▪When the power be offered, microwave sensor starts to detect the environment around.
▪keep the microwave sensor beyond the detection area for 5s.
▪Stand at different position to detect the detection area.
Wiring diagram:

Pictures of Microwave Sensor


The Internal Structure
Adjust the Detection Area
Adjust the Detection Position
Rotate the bracket of microwave sensor to form an angle ( 10-60 degree ) between the MDU sensor module and installation wall in order to adjust the detection area.
The Possibility of Interference
▪Raining
▪Wind Blowing
▪Vibration
▪Lighting