China Automatic Door Motion Sensor

Features of Automatic Door Motion Sensor
a) Adopt microprocessor control technology, with high integration and stability
b) ABS fireproof plastics, durable in use
c) High performance and strong anti-interference ability
d) Long service life and low power consumption
e) Easy to control the detection area
f ) High sensitivity, accurate detection
Applicable Scope
Featured with high sensitivity , quick response and detection accuracy to meet different kinds of autodoor requirements .
Open the Shell
Not being installed
Being installed on the wall
Drilling
Installing on the wall, use the attached template to drill holes, installing on celling, use the attached template to drill holes.
Fixing
The screws are pre-placed on the bracket.
Remove the screws, fixed the main sensor body on the wall.
Operating
▪When the power be offered, microwave sensor starts to detect the environment around.
▪keep the microwave sensor beyond the detection area for 5s.
▪Stand at different position to detect the detection area.
Picture of Microwave Sensor
The Possibility of Interference
▪Raining
▪Wind Blowing
▪Vibration
▪Lighting
The Technical Details

Frequency24.125GHzPower supplyAC/DC 12-24V 50Hz-60HzTechnologyMicrowave and microprocessorEmitting power<20dBm EIRPTransmitting power density<5mW/cm2Power consumption<2W(VA)Ambient temperature-20°C~60°CRelative humidity0-95%Detection range8m(W)x 4m(D)Min. Detection speed5cm/s (measured in the sensor longitudinal axis)Maximum installation height4.5mDetection modeMotionDetection angleHorizontal 120°, Vertical 80°Adjustment angle0° to 90° vertical and -30° to + 30° horizontalDimensions140mm(L) x50mm(W)x48mm(H)Weight210gProtection grade1P 54

The Picture of Automatic DoorsOther Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.