China Automatic Sliding Door Card Reader for ATM Access

The Overall Characteristic of Automatic Sliding Door Card Reader for ATM Access
▪Magnetic head meets the ANSi/ISO standard.
▪There is no card capacity limitation, any credit card of ATM bank can be used.
▪The metal outer cover of alloy of Zinc is sturdy and duable, fixed with prevent demolition screw.
▪Unique anti-interference design to fit a variety of environment installation.Adopt import the alloy magnetic head, wear-resisting, high sensitivity, support different card feeding speed.
▪Characterized with large capacity of lock output module, it can link with various electric locks directly.
▪Dry contact signal output, can be linked wit various auto door, access controller and electric lock simultaneously.With time difference setting to ensure the auto door runs smoothly.
Introducing Sound and Light Direction
Power indicator is red, open indicator is green and the card slot.
Note:When power on, the power indicator is shining with red light.When the open signal received, the open indicator is shining with green light.
Card Reader Connect with Remote Alarm
In order to eliminate the return sparks when connecting with electric lock, please be sure to follow the wiring connection with attachment diode, the white section of diode must be connected with the positive terminal of electric lock.
Do not use other objective other than magnetic cards to open door, ATM card reader should be cleaned with demagnetizer evry 120 days.
This product is made according to the sequence of factory. Under one-year warranty.(Except for the human factor destroy).
Please pay attention to the imput power supply voltage is DC12V. Sufficient voltage of DC12V must be supplied.
Negative terminal and positive terminal must be connected correctly.
Actual output current of DC regulator power supply must be greater than the action current of electric lock.
Open hold time adjustable from 1-9s.
The Picture of Automatic Sliding Door Card Reader for ATM Access
Technical Parameter

Power supplyDC12VOutput current of electric lock3A(12V)Static current22MAOperation current40MAMaintain open time1-10s adjustableTime difference for unlocking and open door0.5sMagnetic card standardISO7811-7815Card feeding speed10-120cm/sOperation temperature-42-45degreeEnvironment humidity10-90%RHDimension138mm(L)x56mm(W)x32mm(H)Weight400g

Other Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.