China Belt Dryer for Orange Peel

INTRODUCTION
DW monolayer belt dryer is a kind of continuous through-flow drying equipment, for drying of sheet, strip and granular materials in good permeability, especially suitable for those materials with high moisture content but allowing no high drying temperature, such as dehydrated vegetables and Chinese medicine decoction pieces. This series of dryer has such advantages: fast drying speed, high evaporation intensity and good product quality. It can also dry paste cake-shape materials after they are processed into granules or rod.
WORKING PRINCIPLE
The materials are put on the belt evenly by the feeder. Belt generally adopts 12-60 mesh stainless steel mesh, dragged by gear in the dryer. Dryer consists of several units, each unit with independent hot air circulation; some tail gas is discharged by specialized wet exhaust fan; exhaust is controlled by valve; hot air goes through screen covered with materials from bottom to top or from top to bottom, completes the process of heat and mass transfer and takes away moisture from materials. Belt moves slowly, with running speed freely adjusted according to the material temperature. After being dried, the finished products continuously fall into collector. Upper and lower circulation unit can be flexibly equipped according to user's needs, so is the number of units.
FEATURES
You can adjust the amount of air, heating temperature, residence time and feeding speed to achieve the best drying results.
Configuration of equipment is flexible; you can use network flushing system and material cooling system.
Most air is cyclic utilization, highly saving energy.
Unique air distribution devices make a more uniform hot air distribution, to ensure the consistency of product quality.
Heating source can be steam, conduction oil, electricity or supported coal-fired (oil) hot blast heater.
APPLICAITON
Dehydrated vegetables, granule feedstuff, monosodium glutamate, coconut, organic pigments, synthetic rubber, synthetic fiber, medicines, crude drugs, small wooden products, plastic products, electronic devices without aging and curing.
TECHNICAL PARAMETERS
Monolayer Belt Dryer
Model Item
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
DW-2-20
Drying Unit(Qty)
4
5
4
5
4
5
10
Mesh Belt(m)
1.2
1.6
2
Drying Length(m)
8
10
8
10
8
10
20
Material Thickness(mm)
10-80
Drying Temperature (oC)
50-140
Steam Pressure(MPa)
0.2-0.8
Steam Consumption (kg/h)
120-300
150-375
150-400
180-500
180-500
225-600
450-1200
Drying Time (h)
0.2-1.2
1.25-1.5
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.5-3
Evaporation Capacity(kg/H2O/h)
60-160
80-200
85-220
100-260
100-260
120-300
240-600
Total Power (kw)
11.4
13.6
14.6
18.7
19.7
24.5
51
Overall Dimensions
9.56x1.49x2.3
11.56x1.49x2.3
9.56x1.9x2.4
11.56x1.9x2.4
9.56x2.32x2.5
11.56x2.32x2.5
21.56x2.32x2.5
Total Weight (kg)
4500
5600
5300
6400
6200
7500
14000Multilayer Belt Dryer
ModelItem
DDW3-1.2-8
DDW3-1.2-10
DDW3-1.6-8
DDW3-1.6-10
DDW3-2-8
DDW3-2-10
Mesh Belt(m)
1.2
1.6
2
Drying Length(m)
8
10
8
10
8
10
Material Thickness(mm)
10~50
Drying Temperature (oC)
50~120
Steam Pressure(MPa)
0.2~0.5
Water Evaporation(kg/h)
80~220
100~320
90~300
120~380
130~400
180~500
Steam Consumption (kg/h)
≤2kg steam evaporates1kg water(for vegetables and Chinese herbal)
Total Power (kw)
21.2
21.2
21.2
22.7
22.7
22.7
Overall Dimensions
11x1.6x2
12.5x1.6x2
11x2.0x2
12.5x2.0x2
11x2.4x2
12.5x2.4x2
Total Weight (kg)
3000
4000
4400
4550
4300
6000
Notes: Calculation of water evaporation depends on drying temperature, material thickness and retention time.
STRUCTURE SCHEMATIC