China Ceramic Slip Slurry Slowly Blender Stirrers for Sale

Product Description

Product use
This slowly agitating equipment is mainly used to stir slip in the ceramic industry, so that the solid particles stored in the slip pool will not precipitate. After the rotating mixing process of the stirring blade, the slip is kept uniformly suspended to achieve the purpose of aging or mixing.
Main structure

1. The flat vane agitator is composed of parallel shaft helical gear reducer, reducer base, coupling, bearing base, base plate, connecting shaft, mixing shaft, mixing blade and bottom fixing base.

2. Agitating pool

3. Electric control system: It is composed of electric control cabinet and control mechanism, external main switch, operation button, indicator light and corresponding instrument.

Detailed Photos

Product Parameters

No.ItemFlat agitatorTypePJ-1450PJ-2000PJ-2700PJ-3300PJ-3600PJ-4500PJ-50001Reducer typeMPF89-Y2.2-4P-0º-109.49-M4MPF99-Y3-4P-0°-102.16-M4MPF109-Y4-4P-0º-101.38-M4MPF99-Y5.5-4P-0º-117.94-M4MPF109-Y5.5-4P-0º-117.94-M4MPF129-Y7.5-4P-0º-126.36-M4MPF159-Y11-4P-180°-162.96-M42power(KW)2.2345.57.57.5113Stirring shaft speed(r/min)13141412121194Total equipment weight(Kg)1403404124274367008745Floor space size(mm)570x600x1000700x700x1050800x800x1250800x800x1200800x800x1250800x800x1500800x800x15006Octagonal slip pool size(φ)φ2000x1500φ2500x2100φ3100x2900φ3600x3300φ4100x3300φ5000x4000φ5500x38507Rotation diameter of agitating blade(mm)14502000270033003600450050008agitating vane layer22222229Slip density in pool(Kg/L)1.7-1.81.7-1.81.7-1.81.7-1.81.7-1.81.7-1.81.7-1.810Embedded plate size(mm)none280x280280x280280x280280x280280x280315x31511Embedded bolt size(mm)M16x220M20x300M20x300M20x300M20x300M20x300T M30x28012base center circle diameter(mm)φ350φ500φ550φ550φ550φ600φ820

Working principle

The agitating pool is equipped with a stirring device, and the slip stored in the pool continuously rotates and rolls through the rotation of the stirring blade inside the pool, so that the slip is always in a suspended state in the pool to ensure the uniformity of the slip; The motor is decelerated by the reducer to transmit the power to the double-layer stirring blade via the coupling and the stirring shaft, so that the stirring blade stirs the slip at a speed of 10.5-14 revolutions per minute. The whole body is installed on the slip pool and fixed by bolts. In order to prevent the rotation of the stirring system, the bottom shaft end of the stirring shaft adopts a radial support to ensure its working stability. The stirring blade is installed on the stirring shaft with bolts. The rotating support part adopts two sets of deep groove ball bearings and one set of thrust ball bearings to ensure the stability and reliability of the entire agitating system.

Company Profile