China Coil Feeder Die Stamping C Frame Power Press Line

Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) APC-110ton---250ton

NameUnitXPC-110XPC-160XPC-200XPC-250Model VHVHVHVHCapacityTon110160200250Rated tonnage pointmm53636373.5Strokemm180110200130250150280170Stable speeds.p.m35-6550-10030-5540-8525-4535-7020-3530-60Die heightmm400435450485500550550605Slide adjustmentmm100100120120Bolster areamm1800 x 650 x 1302000 x 760 x 1502400 x 340 x 1702700 x 900 x 170Slide areamm1400 x 500 x 701600 x 550 x 701850 x 650 x 952100 x 700 x 95Main motorkwxP11 x 415 x 418.5 x 422 x 4Presses weightTon14.22027.545.5Air pressurekg/cm25555Presses precision JIS(CNS) I class Die cushion capacity Two plate Double cylinders CapacityTon3.6 x 26.3 x 210 x 214 x 2Air pressurekg/cm26666Strokemm707080100Die cushion work part dimensionmm2350 x 235 x 2 Group410 x 260 x 2 Group540 x 350 x 2 Group640 x 470 x 2 Group
2) MAC2-width 400mm-800mm

ModelMAC2-400MAC2-600MAC2-800Stock Width(mm)50~40050~60050~800Stock Thickness(mm)0.3~3.20.3~3.20.3~3.2Max. Coil Weight(kg)30003000500050007000Max. Coil O.D.(mm)120012001200Coil I.D.(mm)508508508Feed Length(mm)~500~500~500Max. Line Speed(m/min)16~2416~2416~24Work Roll Numberupper6 / lower5upper6 / lower5upper6 / lower5Feed Roll number111Main Motor(kw)AC2.9AC4.4AC4.4Mandrel ExpansionhydraulichydraulichydraulicReel Motor(kw)1.51.52.22.23.7Power (V)3Phase 220V/380V/50HZOperating Air(Mpa)0.490.490.49
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two- wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1 mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.

Standard Configuration:
* Dry clutch brake
* Standard operating system of xieduan
* Operation Choice/cutting/inch stroke /safe journey/continuation of operating mode
* Oil pressure overload protection device
* Over-run safety device
* Duplex magnetic valve
* Misfeed detection consent
* Electric slider adjusting device
* Digital moulding-height indicator (unit: 0.1 mm)
* Electric butter lubricating device
* Accumulative counter (6 digits)
* Pre-determined counter (6 digits)
* Maintenance counter (6 digits)
* Life counter (6 digits)
* Electronic rotatry cam switch (6 connections)
* Air-blast device 1/2" primary circuit
* Air source connector 1/2" secondary circuit
* Error inspection socket
* Power socket (only apply to single-phase 110V power)

Optional Configuration:
* Wet clutch brake
* Die cushion device
* Vs variable-speed motor
* Touch-screen device
* Photo-electric safety device
* Knock-out Device of ram
* Main motor inversion device
* Foot switch
* Safety dog and safety latch
* T-type two-hand button operating platform
* Inspection variable-connection magnetic valve
* Anti-vibration mechanical foot
* Rapid tooling exchange
* Upper die clamper
* Lower die clamper
* Die lifter
* Mould-shift arm
* Basic bolt and soleplate
* Automatic feeder device
* Three-in-one NC straightening feeder
* NC Roll feeder
* Two-in-one feeder and straightening machine
* Leveller