Product DescriptionCompetitive Price Reflective hot-meltRoad Marking Paint for Road Safety Line
Density: 1.94g/cm3
Drying time: not more than 5mins
Glass beads contents:20%
Softening point: 101degree
The single component product is mainly prepared by acrylic resin, pigment, filler and auxiliaries. The main advantages of this
product are great adhesion, and strong-level resistance to water, alkali and weather. Moreover, its film is clean and tenacious.
Excellent Features● low VOC emission
● Fast drying
● High reflectivity
● Abrasion resistant
● Long durability
● Easy to repairHow to use
Concrete surface treatment:
a. First of all, it is necessary to confirm whether reliable damp-proof facilities are installed below the concrete base. The new
concrete or cement base should be cured for at least 28 days, and its moisture content should not exceed 5%. The moisture content
of the base should be evaluated by empirical method.
b. The base surface should be clean, solid and pollution-free, such as slurry and paint splashing, curing agent, grease and so on.
For excessive float pulp, it is better to first use slight roughing, polishing, oil-stained ground, using electric angle grinder
to polish.
c. The cracks and empty drum on the floor surface should be repaired first.
d. Whatever method is used to treat the surface, a clean, solid and dry base surface must be obtained. It is especially important
that the grassroots should not be in a state of rising tide.
e. The base layer is cleaned and sanded with a sander.Factory OverviewCustomer Visit