China Dyeing Effluent Decolourant Wastewater Treatment Liquid Polymer

Dyeing Effluent Decolourant is good flocculant for color removal for dyeing wastewater treatment.
Features:
1) It is mainly used for color removal treatment for high-colority waste water from Dyestuffs plants. It is suitable to treat waste water with activated, acidic And disperse dyestuffs
2) It can also be used to treat waste water from textile industry and dye houses, Pigment industry, printing ink industry and paper industry
3) It also can be used in the production process of paper and pulp as retention agent
4) It could be used together with polyaluminium chloride and anionic/cationic polyacrylamide to reduce the cost
Specifications:

Specifications:BWD-01 Water Decoloring AgentAppearance:Colorless to yellowish translucid liquidSolid Content: ≥50%Specific Gravity at 20°C:1.1-1.3PH Value (30% Solution):3-6Storage Temperature:10-30 (oC)Viscosity(25°C,cps):50-300Solubility:Soluble With Water at Any Rate

Packing:
30kg pails, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01

1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. about 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result