China Energy Efficient Dimming LED Street Light Controller

Introduction

The NEMA interface wireless single light controller is designed for road and area lighting in smart cities. It has the functions of switching, dimming and monitoring lamps; GPS positioning function; ambient illumination detection and street lamp tilting.The three-primary LED light source is used to reproduce various "natural light" illuminations, with richer chromatograms and softer lighting. In the harsh weather conditions such as rain, fog, hail, snow, sand and dust, collect PM2.5, temperature, humidity, rain and other data, artificial intelligence system to accurately adjust the light to a yellow light with a color temperature of 3000K, using yellow light diffraction Good, high scattering intensity and radiation wavelength make the light penetration ability stronger and effectively solve the driving safety problem. A multi-color temperature LED artificial intelligence street light can be used as a multi-color ordinary monochrome temperature LED street light, and at the same time improve the color rendering index, light efficiency 10%, higher cost performance, longer lamp life.

FeaturesDescriptionSupply powerWide voltage input design: can work at 85~264VAC Surge protection: 10KV, 5KASave powerWorking power consumption: <2W
Power off consumption: <0.4W (120V); <0.5W (230V)Working temperature -40~70ºCRF moduleWorking in the 2.4 GHz ISM band; Comply with IEEE802.15.4 standard; AES128 encryptionDriving powerSupports up to 2200W LED driverDimming interfaceEquipped with 1 channel 0~10V dimming interface (analog), one channel PWMSelf-information monitoringMonitor the lamp input voltage, current, power, power factor and temperature;
Statistical energy consumption and working hours;locationGPS accuracy ±6M (no occlusion)Light controlMeets ANSI C136.10 standard (only in offline mode)DimmingStrategic plan dimming
Light control combined dimming
After the communication failure, work according to the set dimming plan and illuminanceprotectionOver voltage, over current, short circuit protectionWarrantyFive years

PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
AC input voltage

100
/
264
VACAC input current

220VAC
0.02
/
10.05
AAC output current 220VAC,RMS

0
/
10
APower Dissipation

0.4
/
2
WDimming voltage

0
/
11
VDimming current

10Voutput
0
1
5
mADimming accuracy
-1
/
+1
%

Metering voltage range
0
/
300
VACMetering current range

0
/
5
AMetering voltage accuracy

-2
/
+2
%Metering current accuracy

-2
/
+2
%RF transmission distance

3dBi antenna
3dBi
500
/
/
mRF transmission rate Good signal
/
250
/
KbpsRF band
1920
/
2170
MHzRF receiver sensitivity

-98.8
/
/
dBmRF transmitter power

/
/
20
dBmSpectral range of sensitivity

Photocell
350
/
970
nmGPS Sensitivity
Tracking
/
-160
/
dBm

Factory:

Certificate: