China Fire Door Seal Fire Resistance Seal Fireproof Seals Fire Rated Door Seal

Application

Fire Resisting Timber or Steel Doorset

Fire resistance period:

30 to 90 minutes

Insulation/Integrity:

Integrity and insulation

Test standard:

EN 1634-1:2014 & UL 10C (2009)

The ZOINEN Fire and Smoke seals have been designed for use in fire resisting door assemblies to

seal the gapbetween leaf and frame, or between separate leaves, in the event of a fire. When

subjected to the heat ofa fire the intumescent core material expands to fill any gap between

the door leaf and frame. Thisforming of a robust char barrier will hold up the passage of hot

gases and smoke as well as the flames.The ZOINEN Fire and Smoke seals are suitable for use

on fire resisting door assemblies manufactured fromtimber, or timber doors with steel frames.They are unaffected by atmospheric moisture and therefore donot require any further proteMilitary ction.

FIELD OF APPLICATION

•Sutiable for latched single and double door

•Sutiable for unlacted single and double door

•Rebates in door frame or door leaf BENEFITS

• EN 1634-1:2014 & UL 10C

• Easy to cut

• Protects against fire and smoke

•Unaffected by moisture, humidity, atmospheric pollution and other common industrial and

household chemical substance.

• Supplied with a Self-adhesive backing for ease of application

PACKAGING INFOMATION

Product CodeDimension (mm)Packing (PC/Box)ZN-RB100310x3.0330ZN-RB100410x4.0Welding Equipment 250ZN-RB150415x4.0175ZN-RB150615x6.0120ZN-RB200420x4.0125ZN-RB250425x4.0110ZN-RB256025x6.070ZN-RB300430x4.075ZN-RB380438x4.050

FITTING INSTRUCTION

•Intumescent seals needs to be located centrally in either door leaf or frame.

•Rout a groove suitable for the size of intumescent seal selected. Clean the rebate to remove any dust.

•Measure and cut seal to length using a hacksaw. Remove self-adhesive backing and butt joint fit all
seals to inside and outside of door frame or door, and meeting stiles of pairs of doors where
applicable. Pressure must be applied to activateadhesive backing. Remove the self-adhesive backing
liner from the product and push fit into the routed groove.

Q: Are you trading company or manufacturer ?Julia: We are manufacture withCar Electronics 22 years rich experience in this industry.Q: How long is your delivery time?Julia: Depends on the qty, normally within 10 daysQ: Do you provide samples ? is it free or extra ?Julia: Yes, we could send the free samples as freight collectQ: What is your terms of payment ?Julia: Payment<=10,000USD, 100% in advance. Payment>=10,000USD, 30% T/T in advance ,70% TT balance payment before shippment.Q: Can you offer customized serive?
Julia: Sure, Pls offer the samples or drawings.