China Glass Fiber Reinforced Plastics GRP FRP Pipes Cylinders Tube

Glass Fiber Reinforced Plastics GRP FRP Pipes Cylinders Tube
Zhongyi FRP manufactures hand lay up and filament wound FRP pipe in all commercially available resin systems, including polyester, vinyl ester, furan, phenolic, and epoxy thermoset resin systems. Resin systems as well as reinforcements are tailored for specific applications. FDA compliant materials are available, as are flame retardant and dual containment FRP pipe systems.
The design of any pipe system must take into account many different factors. Corrosion allowances, operating pressure, vacuum, temperature, abrasion, flammability, electrical conductivity are just a few of the char- The system analysis is completed using conventional techniques, substituting appropriate physical properties for the fiberglass system specified. A typical Specification
for fiberglass pipe is also available in this catalog binder.

Fiberglass reinforced thermoset plastic pipe (or FRP pipe) is often the material of choice for corrosive process systems. This is due to a variety of factors:
An ability to be tailored for a wide variety of corrosion resistant conditions
Light weight (less than 20% of steel, 10% of concrete)
Excellent strength to weight (stronger than steel on an equal weight basis)
Low coefficient of friction (>25% better than steel)
Good dimensional stability
Low thermal conductivity (saving insulation costs)
Low long-term maintenance costs
An evaluation of the total cost of the system, including all of the above variables, often demonstrates cost savings for fiberglass FRP pipe vs. steel, with even greater cost savings over alternative alloy constructions.
DESIGN CONSIDERATIONS:
Fiberglass FRP pipe design is greatly influenced by the process design. The process will generally determine
the required corrosion liner resin selection and thickness,the design and operating temperatures, pressures, and vacuum.Following a determination of the above criteria, the mechanical design of the fiberglass pipe laminate structure begins. The laminate design will balance the economic benefit of various resin and reinforcement characteristics to meet the specified process design. Finally the overall system is evaluated for proper support, thermal expansion stresses, and compliance with appropriate codes. In the sections that follow, key relationships for fiberglass FRP pipe are highlighted. At the end, a life cycle cost comparison is shown to demonstrate the cost effectiveness of fiberglass pipe vs. steel.

The latest technologies are implemented in the production process at the Zhogyi FRP with the ensuring high quality products. Zhogyi FRP offers customers flexible and continuous service for turnkey projects or maintenance.
The specification of FRP pipe:
Diameter: DN10mm-4000mm
Pressure grade: 0.25MPa,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Length: 6m, 12m , or customized.
Typical Dimensions:

DNL0.6MPa1.0MPa1.6MPa( mm )( mm )TH ( mm )TH ( mm )TH ( mm )1018004.64.64.61518004.64.64.62018004.64.64.62518004.64.64.63218004.64.64.64060004.64.64.65060004.64.64.66560004.64.64.68060004.64.64.610060004.64.64.612560004.64.64.615060004.64.64.6200120004.65 . 95.1250120004.85 . 95.7300120004.956.4350120004.95.17.5400120004.95.88.2450120005.36.28.9500120005.46.710600120006.37.611.3700120006.79.113.1800120007.21014.6900120008.210.916.41000120009.111.817.712001200010131914001200011.314.621.515001200012.215.62316001200013.116.624.51800120001418.527.220001200015.820.529.821001200017.62131.122001200019.52232.424001200020.52435.526001200022.726.5383000120002832.544.2320012000313647.53600120003339.552.440001200034.545.357.8

Engineering Mechanics Index of FRP/Composite Material (1)

1,Pipe Hoop tensile strength200~300MPaLongitudinal tensile strength50~100MPaLongitudinal flexural strength140MPaInterlaminar shear strength50MPaCrosslaminar shear strength60MPaHoop modulus of elasticity25GPaLongitudinal modulus of elasticity12.5GPaShear modulus of elasticity7GPaflexural E--modulus9.3GPa2,Fitting Tensile strength120-290MPaFlexural strength210-410MPaCompression strength130MPaTensile modulus of elasticity9.5GPaFlexural E--modulus9.0GPa

Remarks: The data in the table is the typical data
FAQ
Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products manufacturer in China

Q: Can your factory customize the machine for clients ?
A: Yes, we can.

Q: What is your payment terms ?
A: Normally,30% as the deposit first by T/T, the rest 70% will be paid before shipping by T/T.

Q: How about after-sales service ?
A: 3 year free warranty, Lifetime technical service support.

Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.