China High Strength FRP Polyester Pipe Water Supply GRP Pipe

High Strength FRP Polyester Pipe Water Supply GRP Pipe
FRP has demonstrated that it is corrosion resistant to both salt and regular water. FRP has been used to carry water for many years in pipes and also it has been used successfully to manufacture marine vessels;
FRP has been used to manufacture pressure vessels and has acquired a history of meeting high mechanical properties;
FRP is known to be lightweight compared to metals. For example, a filament wound pipe is normally about 0.06 1bs per cubic inch (1.7 kg/m3) versus 0.28 lbs per cubic inch (7.8 kg/m3) for carbon steel;2 and
FRP has much lower thermal conductivity values. This was important in transporting hot water .
The Filament Winding Potable Water FRP Pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.The process of adding silicon sand will adopts the pheumatic control.In addition ,the high frequency vibrator will be used to densify the silicon sand-adding layer,which can large improve the compactness of the silicon sand-adding layer ,as a result,the ring stiffness of pipe will be also improved effectively and at same time,the phenomenon of dry yarn or no yarn will not exist .The usage of silicon sand-adding device and process can not only improve the quality of pipe a lot but also decrease the cost. Under such case,the products will be strongly competitive in the market.
Engineering Mechanics Index of FRP/Composite Material (1)

1,Pipe Hoop tensile strength200~300MPaLongitudinal tensile strength50~100MPaLongitudinal flexural strength140MPaInterlaminar shear strength50MPaCrosslaminar shear strength60MPaHoop modulus of elasticity25GPaLongitudinal modulus of elasticity12.5GPaShear modulus of elasticity7GPaflexural E--modulus9.3GPa2,Fitting Tensile strength120-290MPaFlexural strength210-410MPaCompression strength130MPaTensile modulus of elasticity9.5GPaFlexural E--modulus9.0GPa

Remarks: The data in the table is the typical data

FAQ
Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products manufacturer in China

Q: Can your factory customize the machine for clients ?
A: Yes, we can.

Q: What is your payment terms ?
A: Normally,30% as the deposit first by T/T, the rest 70% will be paid before shipping by T/T.

Q: How about after-sales service ?
A: 3 year free warranty, Lifetime technical service support.

Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.